Your cart is empty

To add products to cart, please visit our product catalog.

Tikkurila BETOLUX A 0.9L Urethane alkyd floor paint

Article: 1303715

Category: Floor paints

Unit: pc.

Barcode: 6408070005507

11,50 €/pc.
Urethane alkyd paint.
Product features

Interior concrete and wooden floors. Also suitable for repainting epoxy floors or floors previously painted with alkyd paints. 

Recommended uses
Concrete and wooden floors and stairs in residential, commercial and storage premises. Suitable for floors subjected to light mechanical and chemical stress.
The paint is suitable for interior floors The paint is glossy The paint is solvent-borne Tool: roller Tool: spray Tool: brush 
The coverage of the paint on rough surfaces

The coverage of the paint on smooth surfaces
Base paints
A and C
Colour Range
Tikkurila Floor Paints colour card. Additionally large part of colours in Tikkurila Symphony colour card.
Gloss grade
Concrete floors 7-9 m2/l. Metal and wooden surfaces 9-11 m2/l.
Can sizes
0,9 l, 2,7 l, 9 l and 18 l
White Spirit 1050
Application method

Brush, roller or spray.

Drying time at 23°C and 50% relative air humidity

Dust dry after approx. 3-4 hrs. Recoatable after approx. 1 day. Dry to use after approx. 1 week.  Dries completely and reaches final durability in approx. 1 month.

Wash resistance
Good, SFS 3755
Chemical resistance
Good resistance to greases. Resistant to white spirit and methylated spirit.Non-resistant to strong solvents, e.g. thinners
Heat resistance
120ºC, light colours turn yellow in high temperatures, SFS 3757.
Solids volume
Approx. 50 %
approx. 1.0 - 1.2 kg/l, ISO 2811
Product code

Application conditions
The concrete surface to be painted must be dry and at least 4 weeks old. The relative humidity of concrete must be less than 97%. During application and drying, the air, surface and paint temperature must be at least +5º C, and relative humidity of air less than 80 %.
Unpainted surfaces: 
Concrete floors: Remove cement glue coat with a grinding machine. Remove grinding dust. 
Wooden floors: Remove all dirt, oil, dust and grease. 
Previously painted surfaces: 
Wash down previously painted surfaces with Maalipesu (Cleaning Agent), rinse thoroughly with water and allow to dry. Remove old, flaking paint. Sand the surfaces carefully and remove sanding dust. 
Stir the paint thoroughly before use. Apply twice with brush, roller or spray. Dilute 20-25% with White Spirit 1050 for the first coat. The second coat can be applied after one day with unthinned or slighty thinned paint. 
Maintenance painting: 
Surfaces painted previously with Betolux Floor paint can be repainted with Betolux or Betolux Akva Floor paint. See Pretreatment: Previously painted surfaces. 
Non-slip treatment: 
To increase grip on painted surfaces, Non-Slip Agent can be added to Betolux in the ratio of 0.33 l powder to 10 litres of undiluted paint. Mixing by hand is sufficient. Apply two final topcoats with “non-slip” paint. 
Apply “non-slip” paint to the entire floor area or parts of it marked off with tape. It is also suitable for stair step edges.
Cleaning of tools
White Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner)
Maintenance instructions
The painted surface will dry completely and reach its final durability and chemical resistance in approx. 1 month. Avoid cleaning during this period. Clean the surface with a brush, mop or duster, removing dirt with a neutral (pH 6-8) detergent. 
Maintenance treatment
Maintenance painting: 
Surfaces painted previously with Betolux Floor paint can be repainted with Betolux or Betolux Akva Floor paint. See Pretreatment: Previously painted surfaces. 
Weight 1.00 kg