Your cart is empty

To add products to cart, please visit our product catalog.

Tikkurila TUNTO HIENO C 9L Fine Textured Finish

Article: 1303965

Category: Special purpose paints

Unit: pc.

Barcode: 6408070044858

62,00 €/pc.


Water-borne acrylate coating.

Product features

Suitable for new or previously painted concrete, screeded surface, brick, wooden fibreboard, gypsum board or chipboard wall surfaces when a textured coating is desired. TUNTO Fine can also be applied on ceilings.

Recommended uses

Walls and ceilings in dry interiors



The paint is suitable for interior walls The paint is full-matt The paint is water-borne Tool: roller The coverage of the paint on rough surfaces


 The coverage of the paint on smooth surfaces


Base paints

AP and C

Colour Range

Can be tinted to the colours of the TUNTO Colour Card. Lighting conditions and surface structure of the product will contribute to the final colour effect. Product must be premixed before tinting.

Gloss grade



1-9m2/l depending on the painting method as follows:
- thick rolling 1-1,5m2/l
- thin rolling 4-5 m2/l
- brushing 2-2,5m2/l
- thick spatula 2-2,5m2/l
- thin spatula 7-9m2/l

Can sizes

2.7 l, 9 l.



Application method

Apply with roller and for patterning use e.g. a wide brush, wallpaper knife, firm brush or patterning roller. 
Thinning: With water

Drying time at 23°C and 50% relative air humidity

Re-coatable after 24 hours.



Solids volume

Approx. 53 %.


1.0 kg/l, ISO 2811.


Protect from frost.

Product code



Application conditions

The surface to be treated must be dry, and the temperature of the air, surface and coating must be at least +5˚C and the relative humidity of the air below 80 %.


Unpainted surfaces: 
Clean unpainted surfaces from dirt and dust. If necessary, smooth the surfaces with a suitable Presto Light Filler. Prime with Varma Primer. Apply 1-2 coats of Harmony or Nova 7 tinted to the colour of the final product. 

Previously painted surfaces: 
Wash down previously painted surfaces with Maalipesu cleaning agent and rinse carefully with water. If necessary, smooth the surfaces with a suitable Presto Filler. Use sandpaper to sand painted glossy surfaces until they are matt and remove the grinding dust. If the colour difference between the substrate and the finish is significant, we recommend to apply one coat of Harmony or Nova 7 tinted to the colour of the final product. 


Stir TUNTO Fine Textured Finish well before use. Use a roller to apply the product. The surface can be patterned e.g. with a wide brush, wallpaper knife, firm brush or patterning roller. Spread the coating in a thick layer on interior walls approximately one m2 at a time and make the final patterning on the surface immediately. Avoid too thick layers because they may cause the dry surface to crack. For a homogeneous surface reserve enough coating mixed in a single container to avoid possible colour difference.


If plain paintwork or a different kind of structure surface is wanted, level Tunto surface with suitable Tikkurila Presto filler. Continue treatment as in: Preparation Unpainted surfaces.

Cleaning of tools

Clean tools with water. Tikkurila Pensselipesu Tool Cleaner is recommended to remove slightly hardened finish.

Maintenance instructions

Clean surfaces by dry cleaning with a vacuum cleaner, soft brush or dust towel. 

Handle the surfaces with care after the finishing treatment, as the product achieves the final hardness and durability after approx. one month in normal conditions.

Weight 10.00 kg