WHERE TO USE
Waterproofing indoor floor and wall surfaces that are not
subject to rising damp nor in permanent water immersion.
Flexible, anti-fracture membrane. Apply before the installation of
ceramic tiles or stone material.
Mapegum WPS may be used on the following:
plasterboard, gypsum or cementitious render, lightweight cement
block and marine-plywood;
cementitious, anhydrite, wooden and magnesite substrates and
existing ceramic and natural stone after the application of Eco Prim T primer.
Product certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte
Verlegewerkstoffe e.V) as a product with very low emission of
volatile organic compounds.
Ready to use.
Floor coverings may be installed after 12 hours.
Excellent elongation properties.
No reinforcement required.
Some application examples
Waterproofing walls and floors in bathrooms and shower cubicles
before laying ceramic tiles,
natural stone and mosaic.
Waterproofing kitchen walls and floors and work tops before
laying ceramic tiles and natural stone.
The consumption of Mapegum WPS is approximately 1.5 kg/m² per mm
Up to 24 months in original packaging. Protect