A fast setting tile grout for clinker and stone floor tiles. Also for exterior applications. Joint width 2-12 mm. Cementitious.

Special features

• easy to apply and quickly washable special tile grout for floor grouting
• good wear resistance, joint width 2–12 mm
• suitable for clinker and stone floor tiles both indoors and outdoors
• cementitious binder, 7 colours
• economical, 0.5 – 1.5 kg/m² depending on the size of the tile and joint

Application

Kiilto Floor Tile Grout is a fast setting M1-classified tile grout for clinker and stone floor tiles. Designed for professional use. Kiilto Lattiasaumalaasti is suitable for joint width 2–12 mm and joint depth 3 mm at the minimum. Grouting can be done 5 h – 3 days after the tiling work (depending on the adhesive, the substrate and the prevailing conditions).

Consumption

typically 0.5 – 1.5 kg/m² depending on the size of the tile and joint

Type/binder: binders: polymer and cement, aggregate: lime stone and quartz sand

Colors: 7 colours

Bond strength: ≥ 2,5 MPa (EN 13888)

Compression strength: ≥ 15 MPa (EN 13888)

Shrinkage: ≤ 3 mm/m

Mixing ratio: 10 weight parts of grout powder/ 2.3–2.5 weight parts of clean water

Working time: approx. 20-30 min. after adding water

Application temperature: optimal application temperature: +18–20 °C,
the lowest application temperature +5 °C

Frost resistance: compressive strength ≥ 15 MPa and flexural strength ≥ 2,5 MPa (EN 13888) after freeze-thaw cycles

Coverage: typically 0.5 – 1.5 kg/m² depending on the size of the tile and joint

Durability: ≤ 1000 mm3 (EN 13888)

Max. grain size: 0.3 mm

Joint size: joint width 2–12 mm and joint depth 3 mm at the minimum

Water absorption: <2 g/30 min, <5 g/240 min (EN 13888)

Storage: Can be stored in unopened bags in dry conditions max. 9 months, and in plastic pails max. 15 months from the manufacture date.