Fibre reinforced wall plaster for rock material wall surfaces, also in wet areas. Suitable for using with reinforcing mesh, when coated also for exterior walls and socles. Partial levelling 3-15 mm, over plastering 3-10 mm. Also for exterior applications. Cementitious.

Special features

• cementitious binder, fibre reinforced
• dry and wet rooms
• suitable also for outdoor use
• drying time 1–3 d
• partial levelling 3–15 mm, over plastering 3–10 mm
• coverage 1,5 kg/m²/mm

Application

Kiilto KL is a fibre plaster for rock material wall surfaces. Suitable for levelling walls before waterproofing and tiling and installing reinforcing mesh to block walls. When coated suitable also for exterior walls and socles.

Coverage

1 mm layer/m² solid matter weights approx. 1.5 kg

Type/binder: Polymer-cement-sand -based powder

Colors: Grey

Bond strength: > 0,5 MPa (EN 998-1)

Compression strength: CSIV (EN 998-1)

Mixing ratio: 4.2-4.8 l water / 20 kg bag

Curing rate: approx. 1-3 d (+18 °C) (depending on layer thickness and prevailing conditions)

Working time: approx. 2-3 hours (+18 °C)

Working conditions: recommendation: +18–20 °C, lowest operating temperature +5 °C

Package sizes: 20 kg bag

Substrate humidity: concrete < 90 % RH

Coverage: 1 mm layer/m² solid matter weights approx. 1.5 kg

Layer thickness: over plastering 3–10 mm, partial levelling 3–15 mm

Max. grain size: 1.5 mm

Storage: In an unopened package max. 1 year in dry conditions.