Smoothing and filling plaster for brick wall levelling in wet and dry areas. Partial levelling 1-30 mm, over plastering 1-5 mm. Also for exterior applications. Cementitious.

Special features

• cementitious smoothing plaster for bricks
• dry and wet rooms
• when coated suitable also for exterior use
• drying time: over plastering 1 d, partial levelling 1–4 d
• over plastering 1–5 mm, partial levelling 1–30 mm
• coverage 1,4 kg/m²/mm

Application

Kiilto TT is a wall plaster for interior and exterior use. Suitable for levelling and filling rock material surfaces. The finished surface can be tiled or waterproofed with Kiilto waterproofing membrane. It can also be over plastered with other Kiilto wall plasters depending on the application.

Coverage

1 mm layer/m² solid matter weights approx. 1.4 kg

Type/binder: Polymer-cement-limestone -based powder

Colors: Grey

Bond strength: > 0,5 MPa (EN 998-1)

Compression strength: CSIII (EN 998-1)

Mixing ratio: 4.0-4.5 l water / 20 kg bag

Curing rate: approx. 1 d (+18 °C) (depending on layer thickness and prevailing conditions)

Working time: 3–4 hours (+18 °C)

Working conditions: recommendation: +18–20 °C, lowest operating temperature +5 °C

Package sizes: 20 kg bag

Substrate humidity: concrete < 90 % RH

Coverage: 1 mm layer/m² solid matter weights approx. 1.4 kg

Layer thickness: partial levelling 1-30 mm, over plastering 1-5 mm.

Max. grain size: 0.5 mm

Storage: In an unopened package max. 1 year in dry conditions.