Kiilto Masa is a one-component, silyl modified adhesive sealant for gluing and sealing different types of mouldings and rails, construction boards, metals, glass fiber and different types of plastics in ship, boat and transport industries. Also suitable for sealing movement joints exposed to mechanical wear.

Special features

• NSF registered: Can be used in areas where food is handled.
• Good resistance against chemicals
• Good resistance against weathering and UV-radiation
• Paintable
• Suitable for sealing inlets and floor drain in wet areas
• In exterior areas, suitable for sealing penetrations in roofs and metal window sills.

Application

Good adhesion on various stones, concrete, most metals, wood, glass and glazed surfaces as well as epoxy and polyester surfaces. For plastic materials adhesive tests are recommended prior to actual use. M1-emission classification for building products. Solvent-free – does not contain isocyanates or phthalates. Paintable with most water-based paints (always test before use). Very good resistance against weathering, good resistance against UV radiation. Good resistance against chemicals (weak solutions). Salt water resistant. Not suitable for glazing.

Coverage

5 x 5 mm joint, approx. 12 m/cartridge

Type/binder: Silyl modified polymer

Consistency: paste with high viscosity

Density/specific weight: approx. 1.59 kg/l

Colors: white, beige, light grey, dark grey, oak, brown, black, red

Lap shear strength: 2.2 N/mm² (SS-SS)

Tensile strength: 2.1 N/mm² (DIN 53504)

Elongation at break: 400 % (DIN 53504)

Hardness: Shore A 40

Shrinkage: approx. 2 %

Viscosity: approx. 1.5 million mPas (BrookField H-Path T-F/2.5 +20 °C)

Skin time: approx. 15 min (23 °C, 50 % RH)

Curing rate: 3 mm/d, approx. 10 mm/7 d (23 °C/50 % RH)

Application temperature: +1 - +40 °C

Temperature resistance when dry: -40 - +90 °C, +180 °C / 30 min

Coverage: 5 x 5 mm joint, approx. 12 m/cartridge

Max. joint distortion: ± 10 %

Storage: 18 months, unopened (+10–25 °C)