Menu chevron down Created with Sketch.
Client card
Logo 0
Sale
Logo
Categories chevron down Created with Sketch.
Sale

Your cart is empty

To add products to cart, please visit our product catalog.

View cart
Pre-order only! Created with Sketch.
Caparol Disbopur 458 PU-Aqua Siegel 4kg Transparent, aqueous 2-component polyurethane resin

Caparol Disbopur 458 PU-Aqua Siegel 4kg Transparent, aqueous 2-component polyurethane resin

Article: 1101482

Category: Floor paints

Unit: pc.

Barcode: 4002381807403

114,90 €/pc.
Available in stores:
Pre-order only!
Transparent, aqueous 2-component polyurethane resin for matt top sealing of rigid and viscous-rigid polyurethane- and epoxy-based interior coatings. Emission minimised, technically controlled and supervised (TÜV).

Field of Application

Due to the emission-minimised, ecologically compatible formula, particularly suitable for all »sensitive/delicate« areas, as e.g. lounges, hospitals, nurseries, play schools, schools, etc. 
For matt sealing of rigid and viscous-rigid polyurethane- and epoxy-based interior coatings with low resistant of mechanical loads. 
Component of the Disboxid StoneColor System for interior and exterior use. 
Additional top sealer within the Disboxid Multicolor Systems interior, and Disboxid ArteFloor System to achieve a matt surface. 
Enhances anti-slip properties if applied in combination with Disbon 947 Slidestop.

Material Properties

  • Emission minimised.
  • Tested as to harmful substances by German Technical Control Board (TÜV)
  • General Building Approval by the German Institute for Structural Engineering.
  • Enhances the scratch resistance of rigid and viscous-rigid polyurethane- and epoxy-based coatings.
  • Allows better surface cleaning.
  • Reduces the forming of stripes caused by rubber abrasion (skid marks).
  • Proper resistance to chemicals and UV rays.

Tested according to AgBB test criteria for VOC emissions of building materials in interior rooms. The evaluations scheme of AgBB (Ausschuß zur gesundheitlichen Bewertung von Bauprodukten / Committee for the evaluation of building materials regarding health effect) has been derived by the Environmentally and Health Authorities for the use of building materials in sensitive areas, e.g. lounges / occupied spaces.

Material Base / Vehicle

Water-thinnable 2-component polyurethane dispersion.

Packaging/Package Size

4 kg plastic combi-packaging

Colours

Transparent.


The pigmentation in, e.g. coffee, red wine or leaves (organic dyestuffs) and various chemicals, e. g. disinfectants, acids, etc., may cause discolouration. The surface may be scratched by abrasive stress. The functionality of the coating will not be affected by these changes.

Gloss Level

Matt

Storage

Dry, cool, frost-free. 
Tightly closed, original packaging has a shelf life of minimum 6 months. If temperatures are low the material should be stored at 20 °C before application.

Density

approx. 1.05 g/cm3

Dry film thickness

approx. 44 µm/100 g/m2

Abrasion to Taber (CS 10/1000 U/1000 g)

17 mg/30 cm2

Chemical resistance

Chemical Resistance according to DIN 53 168 at 20 °C
7 days
Test groups to testing principles of DIBT, Berlin

Group 1: Motor fuels+
Group 3: Heating fuel (to DIN 51 603-1)
+
Group 4: All hydrocarbons+
Group 7b: Biodiesel (to DIN EN 14214)
+
Group 8: Aqueous solutions of aliphatic aldehydes up to 40%
+
Group 9: Aqueous solutions of inorganic acids (carboxylic acids) up to 10%
+ (D)
Group 10: Mineral acids up to 20%+
Group 11: Inorganic bases+
Group 14: Aqueous solutions of organic tensides
+
Skydrol+
Citric acid, 10% sol.+
Fe III chloride sol., saturated+
Phosphoric acid, 85% sol.+
Xylene (xylol)+
Ammonia, 25% sol.+
Cola+
Coffee+ (D)
Red wine+ (D)
Ethanol, 40% sol.+
Ethanol, 96% sol.+
Distilled water+
White spirit (turpentine substitute)+
Hydrochloric acid, 10% sol.+
Hydrochloric acid, 30% sol.+ (D)
Legend: + = Resistant D = Discolouration
Weight 0.00 kg
Dimensions 0 x 0 x 0 cm
Brand CAPAROL