TECHNICAL DATA

M1

5-10 m2/l.

5 l.

Water

Brush or roller.

approx. 9 %

n. 1 kg/l, ISO 2811

Protect from frost.

270_6001/3

The surface of the concrete must be dry and at least 4 weeks old. Relative humidity of the concrete must be below 97%. During painting work and drying the temperature of the air, surface and paint must be at least 10 ºC, and the relative humidity of the air below 80 %. 
Do not apply on wet or non-absorbing substrate. 

Remove laitance with a sanding machine. 
Remove sanding dust.

Stir Betolux Akva Primer well before use. 
Spread non-diluted Primer on the floor with a roller or brush. The amount of the Primer is adequate when it is absorbed into concrete pores and does not leave a varnish-like film on the surface. 
The primed surface can be painted with Betolux Akva Floor Paint after approx. 2 hours under normal circumstances. 

Clean tools with water or Tikkurila Pensselipesu (Tool Cleaner).