Tikkurila HELMI POHJAMAALI A 2.7L Furniture Primer

Pre-order only!

Tikkurila HELMI POHJAMAALI A 2.7L Furniture Primer

Article: 1303503

Category: Primers

Unit: pc.

Barcode: 6408070022238

50,70 €/pc.

Available in stores:

Pre-order only!

Description
Additional info

DESCRIPTION	Acrylate water-borne primer.
PRODUCT FEATURES	For interior painting of wooden, chipboard, wood fibre board and metal surfaces. Also suitable for repainting surfaces previously coated with an alkyd or acid catalyzed paint. Not suitable for repainting surfaces previously treated with nitrocellulose varnish.
RECOMMENDED USES	Suitable for doors, cabinets, furniture, window frames, skirtings, radiators, sheet metal wood stoves, etc.

TECHNICAL DATA
	6 8
Base paints	A
Colour Range	Light colors tintable according to Tikkurila Symphony 2436 color card.
Gloss grade	Matt
Building material emission class	M1
Coverage	6-8 m2/l per coat. The above should be used as a guide, as actual spreading rates will depend upon many factors including texture, porosity and application method.
Can sizes	0.225 l, 0.9 l, 2.7 l, 9 l
Thinner	Water
Application method	Spray, roller or brush. Airless spray: -nozzle 0.013"-0.015" -thinning 0-5 vol-%
Drying time at 23°C and 50% relative air humidity	Touch dry after approx. 1 hour. Recoatable with Helmi primer approximately after 2 hours. Recoatable with Helmi Furniture Paint approximately after 5 hours.
Solids volume	Approx. 35%
Density	Approx. 1.3 kg/l, ISO 2811
Storage	Protect from frost.
Product code	364-s.

APPLICATION DETAILS
Application conditions	The surface to be painted must be dry, the temperature of the air at least +8 ºC, and the relative humidity of the air below 80%. Lower temperature (approx. +15 ºC) and higher humidity (50-70 % RH) will make the open-time of the paint longer and the work easier.
Preparation	Remove all dirt and dust carefully to obtain good adhesion. Wash down previously painted or lacquered surfaces with Maalipesu Cleaning Agent and rinse carefully with water. Let dry. Remove loose, flaking paint or lacquer with a scraper and sand the whole surface. Remove sanding dust. Fill holes and cracks with Presto Rapid Filler and sand the filled parts. Remove sanding dust.
Priming	Stir Helmi Primer well before use and thin with water, if necessary. Apply by brush, roller, paint pad, or spray. Apply on large surfaces with e.g. a furniture paint roller and then level with a brush. Multi-branched synthetic brushes are best suited for the work. Prime absorbent surfaces first with primer thinned with 5-10 % water, and sand. After 2 hours paint the surface with unthinned primer. Finishing can be done after 5 hours with Helmi Furniture Paint.
Cleaning of tools	Remove excess paint from tools before cleaning with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended for removal of slightly hardened paint.
Maintenance instructions	If needed, at the earliest after approx. 1 month from painting: Clean the surface with a neutral (pH 6-8) diswashing liquid and with soft brush, sponge or cleaning cloth. Clean very dirty surfaces with a lightly alkaline (pH 8-10) diswashing liquid and with cleaning cloth or sponge. Rinse the surface carefully. The surfaces must be handled with care during few weeks after finishing, because the paint will reach its final hardness in normal circumstances after one month. If the surfaces need to be cleansed soon after finishing they must be cleansed lightly with a soft brush or slightly moist cleaning cloth.

Weight	3.00 kg
Brand	TIKKURILA

Tikkurila HELMI POHJAMAALI A 2.7L Furniture Primer

Share