Field of Application

Suitable for high-grade, silk-matt finishing coatings on dimensionally stable wooden parts, metal and unplastizised (rigid) PVC, in the exteriors and interiors. Also suitable for use on hot water radiators with the exception of white shades.
Due to a typical odour of alkyd resin enamels, it is advisable to use Capacryl PU Satin for top coats on large-scale interior substrates instead.

Material Properties

• Non-aromatic solvent (free of aromatic hydrocarbons).
• Excellent colour stability and gloss retention.
• Long open-time.
• Low sagging.
• Excellent opacity, high covering power on edges.
• High impact strength and shock resistance.
• Elegant and easy application.
• Fast-drying.
• Superior flow.
• Resistant to normal household cleaners (detergents) and short-term resistance against weak acids and alkalis.

Material Base / Vehicle

PU alkyd resin, solvent-based, free of aromatic hydrocarbons

Packaging/Package Size

• Standard Colours:
  125 ml✱, 375 ml, 750 ml, 2.5 litres, 10 litres
  ✱Only available in standard colours RAL 9005 Deep Black (Tiefschwarz) and White.

• ColorExpress:
  0.5 litres, 1 litre, 2.5 litres, 10 litres

Colours

White (Weiß), RAL 1021, RAL 3000, RAL 5002, RAL 5010, RAL 6002, RAL 6005, RAL 6011, RAL 7001, RAL 7016, RAL 7035, RAL 8011, RAL 8017, RAL 9001, RAL 9002, RAL 9005 and effect colours RAL 9006 White Aluminium (Weißaluminium) and RAL 9007 Grey Aluminium (Graualuminium).

Approx. 18,000 colour shades can be tinted via ColorExpress (Capalac mix).

When applying colours with low opacity, like Red, Orange or Yellow, it is advisable to apply one priming coat using the matching colour shade of our Priming System. Priming system colours are available via the ColorExpress tinting technique for the following products: Capalac Seidenmatt-Buntlack, Capalac AllGrund, Capalac Vorlack and Capalac Grundierweiß.

Note: If necessary, apply a transparent sealing coat of Capalac Kunstharz-Klarlack (clear coat) on intensively or dark tinted Capalac enamel coatings in order to avoid a slightly abrasion of pigments.

The typical yellowing of alkyd resins may occur and cannot be objected (caused by low UV radiation and white or bright colours, heat or chemical influences due to e.g. ammonia vapour from cleaning agents, adhesives, paint or sealing compounds).

Colour Resistance according to BFS Data Sheet No. 26:
Binder: Class B
Pigmentation: Group 1 to 3, depending on the colour.

Gloss Level

Silk-matt (flat)/semi-gloss (mid sheen / velvet or eggshell-like finish)

Storage

Keep cans/containers tightly closed and in a cool place.

Density

Approx. 1.0 – 1.2 g/cm³, depending on the colour