Finish: Matt
Consumption: 8-10 m²/l
Drying time: 1h
Paint layers: 2

Product Features
•    Easy to apply to the surface
•    Little odor
•    Quick drying
•    Ecolabel

Product Description
An easy-to-apply paint with good hiding power for interior work. The paint does not run off and dries quickly, the painted surface can be washed (class 2 wet abrasion resistance). The product does not contain organic solvents and is practically odorless. Can be tinted in a wide range of colors. The paint meets the requirements of the European Union eco-label. Suitable for painting new and previously painted plastered, concrete, lightweight concrete and brick surfaces, gypsum boards, fibreboard and chipboard and fiberglass wallpaper.

Application Description
Paint a previously unfinished surface in 2 layers, a previously primed or previously painted surface - 1–2 layers. Bindo 7 paint is ready to use. Stir the paint thoroughly before use. If necessary, the first layer can be diluted with clean water (up to 10% of the volume), the finishing layer can be applied to the surface undiluted. Allow the painted surface to dry as required between coats. Paint large surfaces without interruption; breaks can only be taken in the corners. When working, use a large amount of paint, which will allow the painted surface to remain wet longer and extend its processing time. When painting ceilings, work in the direction the light falls, i.e. Make leveling strokes in the direction away from the window. When painting walls, apply paint to the surface first in a transverse direction, and then level the surface with up and down movements of the roller. Make each last movement of the roller along the strip of paint along the entire height of the wall in one direction. Under normal conditions, the latex paint film reaches its final strength within 3-4 weeks after painting, so vigorous cleaning of the painted surface should be avoided until after this period. Working tools: brush, roller, sprayer.

Health and Safety
When finished, tightly close the paint container. Before cleaning the working tool, remove excess paint. Do not dispose of the product into sewers or bodies of water. Deliver liquid paint residues to a collection point for hazardous substances, and only send completely empty containers to a waste management facility.