• Classic matte paint for walls
• Creates a smooth finish
• The painted surface can be washed
• Consumption 8-10 m²/l
• Drying time 1h

A uniform and thick emulsion paint for walls that creates a fine and classic matte surface coating. The paint allows you to achieve a smooth wall finish and adds elegance to any room. It is easy to apply and dries quickly, which allows you to quickly and easily implement the intended project, as well as achieve a professional-looking result without much effort. The painted surface can be washed and easily maintained. A wide selection of shades. The paint "Bindo 7" has a light odor and a very low VOC (volatile organic compound) content. The paint has also been awarded the Nordic certificate "Swan", which confirms compliance with strict environmental standards.
The paint is intended for painting walls in residential and public spaces. Suitable for new and previously painted plaster, concrete and putty surfaces, as well as plasterboard surfaces.

Application description

The paint must be mixed well before use.
Apply 2 coats of paint to the surface with a roller, brush or sprayer, allowing the surface to dry completely between coats. The previous coat of paint must be completely dry before applying the next coat. Large surfaces must be painted without interruption; interruptions are only permissible in corners.
When painting, make sure that there is always enough paint on the roller. The paint must be applied generously so that the painted surface retains moisture for a longer time, as this will make it easier to level it.
During painting, the air and surface temperature must be +10...25°C (recommended +18±2°C), the relative humidity of the air 40...80% (recommended 65%). If the temperature is higher or lower than recommended or there is a draft, a poor quality paint film may form.
The paint is ready to use and does not need to be thinned. Thinning the paint or applying it to the surface in a thinner layer than recommended may impair the properties of the product.