Stafor Natura 1L balta Lineļļas krāsa

Pre-order only!

Stafor Natura 1L balta Lineļļas krāsa

Article: 1094825

Category: Wood preservatives

Unit: pc.

Barcode: 4751005614049

12,50 €/pc.

Available in stores:

Pre-order only!

Description

Ecological glazing paint - stain on linseed oil base containing best quality mineral pigments. It is suitable for painting of beams, log homes, facades of wooden buildings, wooden panels, furniture, floors and other wooden products. Can be used for all types of wood, outdoor and indoor. The paint deeply soaks into the wood, increase resistance of wood, forms a long-lasting weather and UV resistant paint layer, protecting the wood against moisture and damage. At the same time the paint is permeable for air and water vapor, thus allowing the painted wood to „breathe”. Paint consumption: Depends on wood type and condition, average consumption 1l/5-12m2. When treating well-polished wood you should meet 1l/10-12m2, for hand crafted logs 1l/5-6m2. Application: The paint should be thoroughly mixed prior and during its application. Poorly soaking wood is recommended to be previously treated by fine sandpaper. The paint shall be applied in thick layer with paintbrush, sponge or paint roll. After 2-4 hours excess not-soaked paint - stain should be removed with cloth. Soaking time depends on wood type and wish able shade of treated wood. It is recommended to apply 2 to 3 paint layers of which each next one should be laid after drying of the previous layer. Formation of a more covering, non-transparent painting will require application of thicker layer and less intense remove of excess paint. Drying time: 24 to 4 hours, depending on soaking capacity of the wood and the air temperature. Complete drying in 2-3 weeks. Safety: Warning! Aplication materials such as cloth or towels can self-ignitiate! Storage: In original container and in warm warehouse areas. Protect from freezing!

Ecological glazing paint - stain on linseed oil base containing best quality mineral pigments. It is suitable for painting of beams, log homes, facades of wooden buildings, wooden panels, furniture, floors and other wooden products. Can be used for all types of wood, outdoor and indoor. The paint deeply soaks into the wood, increase resistance of wood, forms a long-lasting weather and UV resistant paint layer, protecting the wood against moisture and damage. At the same time the paint is permeable for air and water vapor, thus allowing the painted wood to „breathe”.
Paint consumption: Depends on wood type and condition, average consumption 1l/5-12m2. When treating well-polished wood you should meet 1l/10-12m2, for hand crafted logs 1l/5-6m2.
Application: The paint should be thoroughly mixed prior and during its application. Poorly soaking wood is recommended to be previously treated by fine sandpaper. The paint shall be applied in thick layer with paintbrush, sponge or paint roll. After 2-4 hours excess not-soaked paint - stain should be removed with cloth. Soaking time depends on wood type and wish able shade of treated wood. It is recommended to apply 2 to 3 paint layers of which each next one should be laid after drying of the previous layer. Formation of a more covering, non-transparent painting will require application of thicker layer and less intense remove of excess paint.
Drying time: 24 to 4 hours, depending on soaking capacity of the wood and the air temperature. Complete drying in 2-3 weeks.
Safety: Warning! Aplication materials such as cloth or towels can self-ignitiate!
Storage: In original container and in warm warehouse areas. Protect from freezing!

Stafor Natura 1L balta Lineļļas krāsa

Share