WHERE TO USE

Waterproofing indoor floor and wall surfaces that are not subject to rising damp nor in permanent water immersion.

Flexible, anti-fracture membrane. Apply before the installation of ceramic tiles or stone material.

Mapegum WPS may be used on the following:

plasterboard, gypsum or cementitious render, lightweight cement block and  marine-plywood;

cementitious, anhydrite, wooden and magnesite substrates and existing ceramic and natural stone after the application of Eco Prim T primer.

ADVANTAGES

Product certified EC1 Plus by the GEV Institute (Gemeinschaft Emissions-kontrollierte

Verlegewerkstoffe e.V) as a product with very low emission of volatile organic  compounds.

Ready to use.

Rapid application.

Floor coverings may be installed after 12 hours.

Excellent elongation properties.

No reinforcement required.

Some application examples

Waterproofing walls and floors in bathrooms and shower cubicles before laying ceramic tiles, natural stone and mosaic.

Waterproofing kitchen walls and floors and work tops before laying ceramic tiles and natural stone.

CONSUMPTION

The consumption of Mapegum WPS is approximately 1.5 kg/m² per mm of thickness

STORAGE

Up to 24 months in original packaging. Protect from frost.