Ideal for fixing mineral wool, styrox and acoustic panels and different types of soft boards on walls and ceilings. Good initial tack.

Special features

- excellent initial grip
- consumption: 1-2 m²/l, if applied pointwise, even 4 m²/l
- suitable materials: acoustic panels, plasterboard plates, gypsum panels, halltex or similar indoor cladding panels

Density/specific weight

1.5 kg/l

Storage

In unopened containers, above +1°C, for 18 months. After long storing, stir before use.

Consumption

Approx. 1–2 m2 depending on the substrate, glued material and gluing method.

Working time

15–25 min.
late wet bonding:

Package sizes

1 l, 3 l, 10 l, 15 l

Instructions for use

Suitable substrates are concrete, masonry, building board, painted surfaces (moisture resistant) and most plastics (excl. PE, PP or PTFE). The substrate must be dry and free of dust. Depending on the texture and weight of the material, apply adhesive in dots in 8–10 cm wide strips or on the entire surface so that the board edges are evenly covered with the adhesive. Once applied, press the board onto the substrate immediately. We advise you to place the first panel 5–10 cm off its final position and then slide it firmly to the intended place and tap into position. The adhesive has good initial tack, so no additional support is usually needed, not even with inverted applications. The bond acquires its final strength within 1–5 days depending on the prevailing conditions. Do not try to accelerate the drying via artificial means.

Frost resistance

not stable (frost-resistant adhesive joint)

Substrate humidity

concrete: max. 4 % by weight or below 90 % RH

Working conditions

If the air humidity is very high, the curing process will be slower and problems may occur.

Application temperature

+18-25 °C