ISOVER FacadeTape is a one-sided adhesive tape for ISOVER Facade winding insulation sealing

ISOVER FacadeTape is a one-sided adhesive tape for bonding ISOVER Facade windshield insulating joints. Can also be used for bonding vapor barrier joints. Adhesive tape is suitable for gluing on PE, PA, PU, ​​PP and aluminum films as well as on paper, wood and metal surfaces. Adhesive tape for indoor and outdoor use.

ISOVER Facade 60mm wide ISOVER FacadeTape tape adhesive for vertical and horizontal seam insulation. In the corners of the building, the windscreen insulation is glued vertically with a 90mm wide adhesive tape. It is advisable to stick adhesive tape immediately after winding insulation, thus providing immediate protection against precipitation. Insulation with unsealed seams should not be exposed to the wind for extended periods of time.

 

During cold weather, the surface of the windscreen should be cooled down before applying the adhesive tape, and care must be taken to maintain a suitable adhesive tape temperature so that it can be successfully installed. The bottom mounting temperature of the adhesive tape is -5 ° C, which ensures good adhesion. If the mounting temperature is below +5 ° C, the adhesive tape should be tightened more than usual, to provide sufficient adhesion. Adhesive tape reaches the best adhesion for a few minutes after installation.

 

Consumption of adhesive tape per 1 m2 of plate - 1.4 m (sheets of size 1200x1800); 1.2 m (sheets of size 1200x3000). Adhesive tape consumption also includes gluing window blocks.