Bostik STIX A511 COMBI AIR Lightweight Floor and Wall Adhesive 10 L

Bostik STIX A511 COMBI AIR Lightweight Floor and Wall Adhesive 10 L is a ready-to-use, lightweight, water-based adhesive for installing a wide range of floor and wall coverings indoors.

The adhesive provides high initial tack, good wet-bonding properties and a long open time. Its smooth consistency makes it easy to apply with a notched trowel or a suitable roller. It is suitable for residential and commercial buildings, including larger installation areas.

• Ready-to-use floor and wall covering adhesive.
• Water-based acrylic polymer dispersion.
• Lightweight and easy-to-apply consistency.
• High initial tack and rapid strength development.
• Suitable for dry and wet indoor areas.
• Suitable for residential and commercial premises.
• Compatible with underfloor heating.
• Suitable for areas exposed to castor-chair loads.
• Can be applied using a notched trowel or suitable roller.
• Low-emission product meeting EC1 Plus and M1 requirements.
• White colour.

Recommended coverings: textile tiles, soft vinyl flooring, PVC-free coverings, rubber coverings up to 3.5 mm, linoleum with a plastic backing, textile carpets with a plastic backing and suitable wet-room wall coverings.

Application: the substrate must be clean, level, strong and free from dust, dirt, old adhesive and paint residues. Stir the adhesive thoroughly and apply it evenly using a suitable notched trowel or roller. Install and press the covering according to its manufacturer's instructions.

Approximate coverage is 4 m²/l. The surface is normally walkable after approximately 12 hours, with full curing taking 24-48 hours.

Storage: store in the tightly closed original container at +10 to +20 °C. Protect from frost.