PENOSIL Fast Foam Adhesive 888 830ml Fast-acting adhesive foam

PENOSIL Fast Foam Adhesive 888 is an extra-fast and strong foam adhesive for exterior and interior bonding works. Adheres well to most common building materials such as wood, concrete, stone, plaster, etc.

VALUES

• 2x faster curing time than our other foam adhesives
• High yield, 20% more product
• Replaces traditional adhesives
• Fast and easy to use
• Solvent-free
• Low VOC
• Excellent adhesion on many materials
• For interior and exterior use

APPLICATION AREAS

• Fixing insulation boards on facade and foundation.
• Fixing interior wall boards.
• Fixing windowsills.
• Installing plinths, profiles, decorative and insulation boards, etc. 
• Installing wooden and plaster decorative elements and boards.
• Gluing door and floor finishing fillets.
• Strengthening screw connections. 

ADHERES TO

• Thermal insulation boards
• Concrete
• Masonry
• Plasterboards
• Construction panels
• Bricks
• Blocks
• Wood
• Hard wool 
• Bitumen

TIPS

• Air temperature during use: +5°C to +30°C.
• Always follow building design, building regulations, standards or other relevant guidelines concerning additional mechanical fastening when covering insulation boards with cladding materials. 
• Use of insulation support anchors is always recommended.
• Consult with a sales agent, a dealer or an architect regarding compatibility with various stone-based materials and other technical issues.
• Due to the wide variety of construction materials, we recommend a preliminary compatibility test. 
• Working at low temperatures, the foam can must be prewarmed to room temperature (around +20°C). 
• Use Penosil Foam Cleaner 929 to clean tools and surfaces from uncured foam. 
• Use Penosil Cleaning Wipes 941 to clean hands and clothes from uncured foam. 
• Penosil Foam Remover 995 softens cured foam and helps to remove it easier.

LIMITATIONS

• Does not adhere to polyethylene (PE), PTFE (Teflon®) or silicone surfaces. 
• Do not use at temperatures below +5°C.
• Cured foam adhesive needs to be covered with a suitable material to protect against UV rays. 
• Not recommended for bituminous surfaces. 
• Windowsills must have additional constructional support, foam can only be used as an adhesive.