High quality silicone for sealing connection & expansion joints in sanitary facilities
- Trioprotection - antifungal and antimould
- UV-, ageing- and weather-resistant
- Resistant fo cleaning products
- Suitable for pemanently wet areas (no swimming pools)
- For indoor and outdoor use
CS 25 Sanitary silicone is used for sealing joints in sanitary areas as well as expansion joints in ceramic coverings indoors, outdoors and in permanently wet areas. Adheres to plastics, enamelled and glazed surfaces. Not suitable for use on surfaces in contact with food, drinking water tanks and aquaria.
Joint flanks must be dry, sound, clean and free from substances which may impair adhesion (e.g. oil, grease, old sealant). Screw the nozzle on and cut it off at an angle to match the joint width and fill the sealant into the joint.
Smoothen the sealnt joint within 5 minutes using a suitable tool (e.g. spreader) and water with a little dishwashing liquid or soap added. Always avoid adhesion to three flanks. Observe joint widths of at least 5 mm indoors and of at least 10 mm outdoors. Fill expansion joints with a strip of closed-cell foam beading.