SAKRET SIP/L Silicone Decorative Plaster 2mm 25kg (P)

SAKRET SIP/L 2 mm, 25 kg is a ready-to-use silicone resin-based decorative plaster designed for the decorative finishing of façades, plinths and interior surfaces. The plaster is intended for creating a raindrop or worm-pattern texture and is suitable for both manual and mechanical application.

The high silicone resin content provides very low water absorption while maintaining high water-vapour permeability. The plaster repels water and dirt, is elastic and mechanically resistant, and helps keep the façade finish clean for an extended period.

The product is reinforced with synthetic fibres and contains additives that help limit the formation of mould, algae and lichen. The plaster is suitable for mineral substrates, rendered surfaces, plasterboard and SAKRET ETICS EPS and ETICS MW thermal-insulation systems.

Before application, the substrate must be dry, load-bearing, clean and primed with SAKRET PG primer. Mix the material thoroughly and apply it using a stainless-steel trowel in a layer corresponding to the grain size. Create the raindrop texture with a plastic float using vertical movements.

• Type: silicone decorative plaster
• Texture: raindrop/worm pattern
• Grain size: 2 mm
• Package size: 25 kg
• Colour: white
• Mass tintable
• Ready to use
• Suitable for exterior and interior work
• Suitable for manual or mechanical application
• Consumption: approximately 2.8–3.2 kg/m²
• Very low water absorption
• High water-vapour permeability
• Water- and dirt-repellent
• Reinforced with synthetic fibres
• High mechanical resistance
• Contains additives against microbiological growth
• Suitable for SAKRET ETICS EPS and ETICS MW systems

Storage: store in the unopened original container at temperatures from +5 °C to +30 °C. Protect from frost. The storage period in unopened packaging is 12 months.