Using ready-made plasterboard elements, various types of installations (e.g. pipes, cables) can be covered simply and aesthetically. Milled elements made of plasterboard do not need to fill the corners and reinforce them with additional tapes or angles, which significantly shortens the assembly time.

Ready-made NORGIPS ReadyMIX putty is used for connecting elements from plasterboard boards together with a reinforcing tape. After puttying the joints of the milled elements and the places where the fittings are screwed to the profiles, you can freely process the whole element: with paint, wallpaper, glaze, etc. If the body will be painted at the end, the dry joints must be sanded and puttyed again using a ready-made finishing mixture (eg NORGIPS Ready MIX, NORGIPS Extra Finish). To obtain a perfectly smooth and uniform surface structure, plaster can be applied to the entire body.

• 2 milled plasterboard elements, 12.5 mm, GKBI type, H2 (impregnated board) length 125 cm
• two UD 30 profile elements, length 120 cm
• six UD 30 profile elements, length 60 cm
• 50 plasterboard screws 3.5x25 mm
• 14 universal dowels 6x40 mm
• assembly instructions