Gasoline engine water pump LTP 250/25 4-stroke, 2.5HP, T.I.P. Pumpen

The pump with a four-stroke gasoline engine and air cooling is intended for pumping mechanically clean and chemically non-aggressive liquids from tanks, pools, open reservoirs.

Application: In irrigation systems, for washing, for quick filling of various tanks, for small flood prevention works as well as everywhere where electricity is not available.

It is forbidden to pump chemically aggressive, explosive liquids, sewage water, water containing sand and gravel.

Special function "Auto Stop". If the oil level in the crankcase is lower than the permissible level, the engine is automatically stopped. The engine can only be started when a sufficient amount of oil has been added.

Model: LTP 250/25
Engine: 4-stroke air-cooled
Cylinder capacity: 127 cm3
Maximum engine power: 1.8 kW (2.5 HP)
Fuel: Gasoline A-95
Fuel tank capacity: 1.6 liters
Engine oil: 4-stroke
Engine oil quantity: 0.5 liters
Spark plug: LD E6TC
Maximum capacity: 250 l/min (15m3/h)
Maximum lifting height: 25 m
Maximum pressure: 2.5 bar
Maximum suction height: 6 m
Maximum pumped water temperature: +40° C
Min. pumped water temperature: +2° C
Pressure pipe connection: Ø40 mm
Suction pipe connection: Ø40 mm
Weight without fuel and oil: 16.5 kg