Sadolin BINDO 3 BW 15L Latex paint for ceilings and walls

Product description
A homogeneous, thick emulsion paint for ceilings and walls that creates a deep matt and flawless finish. Easy to apply and fast drying, allowing a professional-looking result with minimal effort. Can be tinted in light shades. Bindo 3 paint has a mild odour and a very low VOC (volatile organic compounds) content. The product is also certified with the Nordic Swan Ecolabel, confirming compliance with strict environmental standards.

AREA OF USE
The paint is intended for painting ceilings and walls in residential and public spaces where high wear resistance is not required. Suitable for new and previously painted plastered, concrete and filled surfaces, as well as plasterboard panels.

Application instructions
Stir the paint thoroughly before use.
Apply 2 coats using a roller, brush or spray, allowing each coat to dry completely. The previous coat must be fully dry before applying the next one. Large surfaces should be painted continuously; breaks are only allowed in corners.
Ensure the roller is always sufficiently loaded with paint. Apply generously to keep the surface wet longer, making it easier to level.
During application, the air and surface temperature should be +10…25 °C (recommended +18±2 °C), and relative humidity 40…80% (recommended 65%). If conditions are not met or there is a draught, an inferior paint film may form.
The paint is ready to use and must not be diluted. Dilution or applying a thinner layer than recommended may impair the product’s performance.