Categories chevron down Created with Sketch.

Your cart is empty

To add products to cart, please visit our product catalog.

Tikkurila SIRO HIMMEÄ AP 9L Reflection-free ceiling paint

Article: 1305242

Category: Ceiling paints

Unit: pc.

Barcode: 6408070012130

83,50 €/pc.
Available in stores:
Pre-order only!


Reflection-free ceiling paint

Product features

Interior painting of concrete, plaster, filler treated, brick, cardboard, chipboard, gypsum board and wood fibre board surfaces according to instructions. Suitable also for maintenance painting of previously painted surfaces.

Recommended uses

Ceilings in dry interior premises




The paint is full-matt The paint is water-borne Tool: roller Tool: spray Tool: brush The coverage of the paint on rough surfaces


 The coverage of the paint on smooth surfaces


Base paints


Colour Range

White. Tintable in colors marked with A from Tikkurila Symphony color card. Half of the colorant amount shown in the tinting formula is used in tinting. Shades may differ slightly from the color samples. Check the shade when using Siro Matt as a top coat.

Gloss grade


Building material emission class





Non-absorbent surfaces 9-11 m2/l.

Absorbent surfaces 5-7 m2/l.

Can sizes

0,9 l, 2,7 l, 9 l, 18 l.



Application method

Roller, brush or spray.

Airless spray:

- nozzle 0,017" - 0,021"

- thinning 0-5 vol.-%

Drying time at 23°C and 50% relative air humidity

Dust dry after half an hour.

Recoatable after 2-4 hours.

Wash resistance

Withstands wiping with a damp cleaning cloth.

Wet scrub resistance

SFS-EN 13300 class II, ISO 11998.

Heat resistance

85°C, ISO 4211-3.

Solids volume

Approx. 35 %, depending on shade.


Approx. 1.3 kg/l, ISO 2811


Protect from frost.



Application conditions

The surface to be painted must be dry, the temperature of the air at least +10°C, and the relative humidity of the air below 80 %. 


Unpainted surfaces: 
Remove all dirt and dust from new surfaces. Smooth the surfaces with a suitable Presto filler, if needed, and sand the dried surface. 

Previously painted surfaces: 
Wash down previously painted surfaces with diluted Maalipesu cleaning agent and rinse carefully with water. Sand hard or glossy surfaces matt and remove sanding dust. Fill holes and cracks with a suitable Presto filler and sand the dried surface. 


Stir Siro Matt well before use and thin with water, if necessary. Apply one or two coats with a roller, brush or spray.

Cleaning of tools

Remove excess paint from tools and clean with water. Tikkurila Pensselipesu (Tool Cleaner) is recommended to be used for cleaning hardened paint.

Maintenance instructions

Cleaning earliest abt. 1 month after application of the finish. 

The surfaces are cleaned with a well squeezed damp sponge or cleaning cloth and neutral (pH 6 – 8) washing detergent. Dilution instructions given by the detergent producer have to be followed by preparing the washing dilution. The surface must be dried after the cleaning. 

The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a damp cleaning cloth. 

Weight 10.00 kg
Dimensions 30 x 30 x 21 cm