Alkyd enamel for a floor. Enamel is intended for painting indoor wooden surfaces.
Surface shoud be clean and dry. Old paint cover should be removed. It can be done with paint stripper LARAFĒNS. Non flaking surfaces should be grinded with sandpaper till a matt. Fresh concrete surface should be dried for no less than 21 days, after that it should be grinded. Rough surface should be puttied.
Previously non painted wooden surface should be primed with mix of enamel and white-spirit in proportion 10:1. Enamel need to be applied in 1 layer with brush or paint roller. Leave surface for drying, after that slightly grind it with sandpaper and vacuum. Concrete surface should be grind with mix of enamel and white-spirit in proportion 10:3.
Before using enamel it should be stirred and if it is necessary than diluted with solvent to a viscosity. Enamel need to be applied in 2 layers with intermediate drying of each layer for no less than 24 hours. Working tools should be washed by a solvent.