Carbon fibre-reinforced, 2-component epoxy resin coating for interior floor spaces in garages, storage and basement rooms. End of pot life is noticeable. Emission-minimised, technically controlled and supervised (TÜV).
Field of Application
Interior mineral floor spaces and hard asphalt screeds, exposed from low to average loads, in the private sphere or industrial and commercial sectors.
Floor spaces in garages, cycle-stands, wash and sanitary rooms.
Due to the emission-minimised and TÜV monitored formula particularly suitable for all sensitive areas, as e.g. lounges, hospital facilities, nursery schools and day-care facilities for children, schools, etc.Material Properties
- High impact strength
- Excellent cleanability
- Very good abrasion resistance
- Little abrasive wear
- Allows water vapour diffusion
- Good chemical resistance
- Tire resistant - Resistant to the penetration of plasticizers/softening agents
- Ecologically compatible, because water-thinnable (dilutable)
- Emission-minimised, tested for harmful substances and monitored by Technical Control Board (TÜV)
Tested & approved according to AgBB testing criteria for VOC emissions from building material that is used for interior work. The criteria of AgBB (Ausschuss zur gesundheitlichen Bewertung von Bauprodukten; Commission for the sanitary evaluation of building material) are elaborated by the ecological and sanitary authorities for the use of building material in „delicate/sensitive" areas, as e.g. lounges. |
Material Base / Vehicle
Water-thinnable, 2-component epoxy resin
Packaging/Package Size
- Standard
5 kg, 10 kg plastic combi-packaging - ColorExpress
5 kg, 10 kg plastic combi-packaging
Colours
- Standard:
10 kg container: Kieselgrau (Gravel Grey), Betongrau (Concrete Grey), Mittelgrau (Medium Grey).
5 kg container: Kieselgrau (Gravel Grey), Betongrau (Concrete Grey).
Special colours available on request.
- ColorExpress:
Over 25,000 shades are available in the ColorExpress stations. Exclusive colouring is possible due to colour shades of the FloorColor plus collection. Depending on the shade, base 1, base 2 or base 3 can be mixed via ColorExpress stations.
Slight discolouration and chalking effects may occur with weathering and UV light exposure. The colourants in e.g. coffee, red wine or leaves (organic dyestuffs) and various chemicals, e.g. disinfectants, acids, etc., may cause discolouration. Scratch marks may appear on the surface due to continued rubbing/sliding. Proper functioning of the coating will not be affected by these changes.
Gloss Level
Glossy
Storage
Keep in a cool, dry and frost-free place. Shelf life of the original, tightly closed packaging: Minimum
2 years. If temperatures are low, the material should be stored at 20 °C before application.Density
Approx. 1.4 g/cm³Dry film thickness
Approx. 35 µm/100 g/m2Resistance-count for diffusion µ (H2O)
Approx. 20,000Abrasion to Taber (CS 10/1000 U/1000 g)
66 mg/30 cm2Chemical resistance
Chemical Resistance Table according to DIN EN ISO 2812 at 20 °C | 7 days |
Acetic acid, 5 % solution | + (D) |
Sulphuric acid, 20 % solution | + (D) |
Nitric acid, 10 % solution | + (D) |
Hydrochloric acid, 10 % solution | + (D) |
Liquid ammonia, 25 % solution | + |
Xylene (Xylol) | + |
Test fluid group 5✱ | + |
De-icer | + |
Petrol / gasoline DIN 51 600 | + |
Test fluid group 4✱ | + |
Skydrol (hydraulic fluid) | + |
Shell Diala-oil (transformer coolant) | + |
Legend: + = Resistant, (D) = Discolouration ✱ Acc. to German construction and test guidelines for water protection (DIBt). |