Transparent, 2-component liquid epoxy resin for priming mineral floor spaces. Emission-minimised, tested for harmful substances and supervised. Particularly suitable for moisture sensitive substrates.

Field of Application

Due to the emission-minimised formula, tested for harmful substances, the product is particularly suitable for all "delicate/sensitive” areas, as e.g. lounges, hospitals, nurseries and play schools, schools, etc.
Permanent strong adhesion, even with strong temperature and moisture variations, if combined with Disboxid 421 E.MI Coat and other Disbon top coats.

Used as a primer, scratch-filler and mortar coating on mineral substrates under floor coatings in e.g.
– production areas and warehouses
– offices, lounges and selling rooms.

Suitable as binder for Disboxid 946 Mörtelquarz (mortar quartz) for the setting-up of highly wear-resistant industrial coatings, concave fillets and for reprofiling of spallings.
Suitable as a smooth or slip-resistant (anti-skid) sealer.
For filling cracks.
Suitable as green concrete protection, avoiding extremely fast drying.
Priming surfacer within the car park (parking garage) system Disboxid OS 8  E.MI II

Material Properties

• Emission-minimised.
• Tested for harmful substances.
• Approved by the German Institute for Structural Engineering.
• Free from benzyl alcohol and alkyl phenol.
• Good penetration to the substrate.
• Excellent anchorage in concrete.
• Free from substances detrimental to proper enamel wetting.

Material Base / Vehicle

Low-viscous, 2-component liquid epoxy resin, total solid according to Deutsche Bauchemie.

Packaging/Package Size

1 kg, 5 kg, 10 kg combined tin container, 
25 kg packaging (Base material: 17.5 kg tin hobbock, hardener: 7.5 kg tin bucket)

Colours

Transparent

The primer can be pigmented with Disboxid 980 NEFA®POX pigment paste.
Discolouration and chalking effects may occur with weathering and UV light exposure. The colourants in e.g. coffee, red wine or leaves (organic dyestuffs) and various chemicals, e.g. disinfectants, acids, etc., may cause discolouration. Proper functioning of the coating will not be affected by these changes.

Storage

Keep in a cool, dry and frost-free place. 
Tightly closed original containers have a minimum shelf life of 2 years. If temperatures are low, the material should be stored at approx. 20 °C before application.

Density

approx. 1.1 g/cm³

Dry film thickness

approx. 90 µm/100 g/m2

Abrasion to Taber (CS 10/1000 U/1000 g)

approx. 43 mg/30 cm2

Pendulum hardness to König

approx. 197 seconds

Compression strength

approx. 89 N/mm2