Menu chevron down Created with Sketch.
Logo 0
Sale
Logo
Categories chevron down Created with Sketch.
Sale

Your cart is empty

To add products to cart, please visit our product catalog.

View cart
Pre-order only! Created with Sketch.
Caparol Disboxid 422 E.MI ClearCoat 10kg Transparent, 2-component liquid epoxy resin

Caparol Disboxid 422 E.MI ClearCoat 10kg Transparent, 2-component liquid epoxy resin

Article: 213630

Category: Floor paints

Unit: pc.

Barcode: 4002381888037, 4002382014893

150,90 €/pc.
Available in stores:
Pre-order only!
Transparent, 2-component liquid epoxy resin. Suitable for sealing chips-treated rigid EP floor coatings, sealing top coat for Disboxid ArteFloor-System & Disboxid MultiColor-System. Emission-minimised, technically controlled and externally monitored (TÜV)

Field of Application

Due to the emission-minimised, ecologically compatible formula, particularly suitable for all »sensitive/
delicate« areas, as e.g. lounges, hospitals, nurseries, play schools, schools, etc.
High-gloss, protective sealing top coat on rigid epoxy coatings that have been colour designed or strewn/scattered with coloured paint flakes (chips).
Component of the Disboxid MultiColor-System for representative interior spaces.
Component of the Disboxid ArteFloor-System.

Tested & approved according to AgBB testing criteria for VOC emissions from building material that is used for interior work. The criteria of AgBB (Ausschuss zur gesundheitlichen Bewertung von Bauprodukten; Commission for the sanitary evaluation of building material) are elaborated by the ecological and sanitary authorities for the use of building material in „delicate/sensitive" areas, as e.g. lounges.

Material Properties

  • Emission-minimised
  • Tested for harmful substances by Technical Control Board (TÜV)
  • Transparent
  • Low yellowing tendency
  • Enhances the colour saturation of designed floor coatings
  • Durable/hard-wearing and abrasion-resistant
  • Adjustable to achieve a slip-resistant surface

Material Base / Vehicle

Low-viscous, liquid 2component epoxy resin, free of Bisphenol A and B-based epoxy resins, total solid (as per Deutscher Bauchemie / German Construction Chemicals).

Packaging/Package Size

10 kg tin-combi-packaging, 25 kg bucket (Base material: 16.67 kg tin hobbock, Hardener: 8.33 kg tin bucket)

Colours

Transparent

Discolouration and chalking effects may occur with weathering and UV light exposure. The colourants in e.g. coffee, red wine or leaves (organic dyestuffs) and various chemicals, e.g. disinfectants, acids, etc., may cause discolouration. The surface may be scratched by abrasive stress. Proper functioning of the coating will not be affected by these changes.

Gloss Level

Glossy

Storage

Keep in a cool, dry and frost-free place.
Tightly closed original packaging has a minimum shelf life of 2 years. If temperatures are low, the product should be stored at 20 °C before application.

Density

Approx. 1.1 g/cm3

Dry film thickness

Approx. 95 µm/100 g/m2

Abrasion to Taber (CS 10/1000 U/1000 g)

23 mg/30 cm2

Pendulum hardness to König

Approx. 175 seconds

Shore hardness (A/D)

Approx. D 82

Chemical resistance

Chemical Resistance Table according to DIN EN ISO 2812-3:2007 at 20 °C
7 Days
Acetic acid 5 % solution+ (D)
Hydrochloric acid 10 % solution+ (D)
Sulphuric acid 10 % solution+ (D)
Citric acid 10 % solution+
Lactic acid 10 % solution+
Ammonia solution 25 % (ammonium hydroxide)+
Caustic potash solution 50%+
Caustic soda/sodium hydroxide solution 50%+
Distilled water+
Common salt solution, saturated+
PG 1✱ (petrol/gasoline)+
PG 3✱ (heating oil & unused combustion engine motor oils)+
PG 7b✱ (biodiesel)+
Coca-Cola+
Coffee+
Red wine+ (D)
Legend: + = Resistant, D = Discolouration
✱ Complies with construction & testing principles for water pollution control of the DIBt (German Institute of Building Techniques).