Sadolin BINDO 3 BW 0.9L Deep matt paint for walls and ceilings

for interior work

• Non-bleeding
• Quick drying
• Washing resistant
• Tinted in light colors
• Consumption 1 (m2/l) 8-10 m2/l

A homogeneous and thick emulsion paint for ceilings and walls that creates a deep matte and flawless surface finish. It is easy to apply and dries quickly, which allows you to achieve a professional-looking result without much effort. Can be tinted in light colors. The paint "Bindo 3" has a light odor and a very low VOC (volatile organic compound) content. The paint has also been awarded the Nordic certificate "Northern Swan", which confirms compliance with strict environmental standards.
APPLICATION
The paint is intended for painting ceilings and walls in residential and public spaces (if high wear resistance requirements are not required). Suitable for new and previously painted plaster, concrete and putty surfaces, as well as plasterboard surfaces.

Application description

The paint must be mixed well before use.
Apply 2 coats of paint to the surface with a roller, brush or sprayer, allowing the surface to dry completely between coats. The previous coat of paint must be completely dry before applying the next coat. Large surfaces must be painted without interruption; interruptions are only permitted in the corners.
When painting, make sure that there is always enough paint on the roller. The paint must be applied generously so that the painted surface retains moisture for a longer time, as this will make it easier to level it.
During painting, the air and surface temperature must be +10...25°C (recommended +18±2°C), the relative humidity 40...80% (recommended 65%). If the temperature is higher or lower than recommended or there is a draft, a poor-quality paint film may form.
The paint is ready to use and does not need to be thinned. Thinning the paint or applying it to the surface in a thinner layer than recommended may impair the properties of the product.