BIOLAR fast drying alkyd enamel for floors 0.8L brown

CHARACTERISTIC:

Alkyd enamel for a floor. Enamel is intended for painting indoor wooden surfaces.

SURFACE PREPARATION:

Surface shoud be clean and dry. Old paint cover should be removed. It can be done with paint stripper LARAFĒNS. Non flaking surfaces should be grinded with sandpaper till a matt. Fresh concrete surface should be dried for no less than 21 days, after that it should be grinded. Rough surface should be puttied.

PRIMING:

Previously non painted wooden surface should be primed with mix of enamel and white-spirit in proportion 10:1. Enamel need to be applied in 1 layer with brush or paint roller. Leave surface for drying, after that slightly grind it with sandpaper and vacuum. Concrete surface should be grind with mix of enamel and white-spirit in proportion 10:3.

INFLICTION:

Before using enamel it should be stirred and if it is necessary than diluted with solvent to a viscosity. Enamel need to be applied in 2 layers with intermediate drying of each layer for no less than 24 hours. Working tools should be washed by a solvent.