Logo
Categories chevron down Created with Sketch.
Sale

Your cart is empty

To add products to cart, please visit our product catalog.

Tikkurila JOKER A 2.7L Solvent free co-polymer emulsion paint

Article: 212167

Category: Wall paints

Unit: pc.

Barcode: 6408070031636

30,30 €/pc.
Available in stores:
Mūkusalas iela 93
Ata iela 5a
t/c Sāga

Description

Solvent free co-polymer emulsion paint that resists cleaning and dries to a superfine matt finish with a slight sheen.

Product features

Joker is suitable for interior painting of plaster, concrete, filler treated, brick, cardboard and wooden surfaces, also for cardboard-finished gypsum board, chipboard and wood fibre board surfaces. Suitable for new and previously painted surfaces. Not suitable for painting doors and furniture.

Recommended uses

For painting ceilings and walls in living rooms, bedrooms and children’s rooms, as well as halls and kitchens and other similar dry premises. Joker resists cleaning.

TECHNICAL DATA

The paint is suitable for interior walls The paint is matt The paint is water-borne Tool: roller Tool: spray Tool: brush The coverage of the paint on rough surfaces


m2/l

The coverage of the paint on smooth surfaces

12 
m2/l

Base paints

A and C

Colour Range

Tintable in shades of the Tikkurila Symphony colour card.

Gloss grade

Matt

Building material emission class

M1

 

 

Coverage

7-9 m2/l for absorbing surfaces. 10-12 m2/l for non-absorbing surfaces.

 

Can sizes

A and C base paints 0,225 l, 0,9 l, 2,7 l, 7.22 l, 9 l, Base paint A also in 18 l can.

Thinner

Water

Application method

Brush, roller or spray. For airless spray application, use a nozzle 0.015” – 0.021”. Thinning: If necessary thin up to 10% with water

Drying time at 23°C and 50% relative air humidity

Dust dry after 1/2 hour, re-coatable after 1-2 hours.

 

 

Chemical resistance

Resists cleaning detergents and weak solvents e.g. White Spirit.

Heat resistance

85°C, ISO 4211-2 and ISO 4211-3

Wet scrub resistance

SFS-EN 13300 class II, ISO 11998

Solids volume

Approx. 40% depending on the colour shade

Density

Approx 1.3 kg/l depending on the colour shade, ISO 2811

Storage

Protect from frost.

 


APPLICATION DETAILS

Application conditions

The surface to be painted must be dry, the temperature of the air at least +5˚C, and the relative humidity of the air below 80 %.

Preparation

New surfaces: 
Clean dirt and dust from the unpainted surfaces. Level the surface with suitable Presto filler, if needed, and sand the dried surface. Remove sanding dust. Prime with e.g. Varma Primer. 

Previously painted surfaces: Wash down previously painted surfaces with Cleaning Agent (Maalipesu) and rinse carefully with water. Sand down hard, glossy and with alkyd paint treated surfaces matt. Remove sanding dust. Fill cracks and holes with suitable Presto filler and sand the dried surface. Remove sanding dust. If priming is needed, use e.g. Varma Primer before coating. 

Painting

Stir Joker well before use and thin with water, if necessary. Apply by brush, roller or spray 1-2 times.

Cleaning of tools

Clean tools with water and soap. Tikkurila's Pensselipesu (Tool Cleaner) is recommended for cleaning hardened paint.

Maintenance instructions

Avoid cleaning approx. 1 month after the painting work. 
Clean surfaces with a neutral (pH 6-8) detergent using a sponge or cleaning cloth. Very dirty surfaces can be cleaned with a weakly alkaline (pH 8-10) detergent using e.g. a cleaning cloth or a sponge. Rinse the surface carefully. 
Follow the dilution instructions of the detergent producer when preparing the solution. 

Handle the surface with care, ultimate durability and hardness is reached in approx. one month under normal circumstances. If cleaning is needed, use a damp cleaning cloth. 

Maintenance treatment

Maintenance painting: 
Surfaces painted with Joker can be maintenance painted with same or same kind of waterborne paint. See Preparation. 

Attachments Declaration
Weight 3.00 kg
Dimensions 18 x 18 x 18 cm
Brand TIKKURILA