Categories chevron down Created with Sketch.

Your cart is empty

To add products to cart, please visit our product catalog.

Tikkurila REMONTTI-ÄSSÄ A 2.7L Semi-matt, solvent-free acrylate paint

Article: 1303957

Category: Wall paints

Unit: pc.

Barcode: 6408070001615

33,50 €/pc.
Available in stores:
t/c Sāga


Semi-matt, solvent-free acrylate paint.

Product features

For interior painting of concrete, plaster, brick, filler treated, chipboard, card-boarded gypsum board and wood fibre board surfaces. For new surfaces and also for redecoration according to directions for use. 

Recommended uses

Wall and ceiling surfaces, especially suitable for surfaces requiring frequent washing like kitchens, entrance halls and staircases. Remontti-ässä is not suitable for furniture.


The paint is suitable for interior walls The paint is semi-matt The paint is water-borne Tool: roller Tool: spray Tool: brush The coverage of the paint on rough surfaces


The coverage of the paint on smooth surfaces


Base paints

A and C

Colour Range

Tikkurila Symphony colour card.

Gloss grade


Building material emission class





Non-absorbing surfaces 10-12 m2/l. Absorbing surfaces 7-9 m2/l.

Can sizes

Base paint A: 0.9 l, 2.7 l, 7.2 l, 9 l, 18 l. 
Base paint C: 0.9 l, 2.7 l, 9 l.



Mixing ratio

If necessary, thin with up to 5% with water.

Application method

Roller, brush or spray. For airless spray, use nozzle 0.015"-0.021"


Drying time at 23°C and 50% relative air humidity

Dust dry in 1/2 hour, re-coatable after 2 hours.



Chemical resistance

Resists cleaning chemicals and weak solvents e.g. White Spirit.

Heat resistance

+85 °C, ISO 4211-2 and ISO 4211-3.

Wet scrub resistance

SFS-EN 13300 class I, ISO 11998.

Solids volume

Approx. 41 % depending on shade


Approx. 1.3 kg/l depending on shade, ISO 2811


Protect from frost.

Product code



Application conditions

The surface to be painted must be dry, the temperature of the air at least +5 ºC, and the relative humidity of the air below 80 %.


Unpainted surfaces: 
Clean dirt and dust from unpainted surfaces. If necessary, smooth down the surfaces with a suitable Presto filler. Remove sanding dust. Prime with Feelings Universal Primer or Varma Primer. Prime steel surfaces with Otex Adhesion Primer. 

Previously painted surfaces: 
Clean previously painted surfaces with Tikkurila Cleaning Agent (Maalipesu) and rinse carefully with water. Smooth down holes and hollows with a suitable Presto Filler and sand the dried surface. Sand hard or glossy surfaces to a matt finish and remove sanding dust. If necessary, prime with Feelings Universal Primer or Varma Primer. 


Stir Remontti-ässä well before use and thin with water, if necessary. Apply by roller, brush or spray 1-2 times.

Cleaning of tools

Clean tools with water. Tikkurila Pensselipesu (Brush Cleaner) is recommended for cleaning hardened paint from the brush.

Maintenance instructions

Cleaning earliest abt. 1 month after application of the finish, if needed. 

The surfaces are cleaned with a sponge or cleaning cloth and neutral (pH 6-8) washing detergent. Very dirty surfaces are cleaned with a sponge or cleaning cloth and alkaline (pH 8 – 10) washing detergent. Rinse carefully. Dilution instructions given by the detergent producer have to be followed when preparing the washing dilution. 

The product achieves its final hardness and durability after one month under normal conditions, therefore the surfaces must be handled with care during this time. If the surfaces need to be cleaned soon after finishing, clean them lightly with a damp cleaning cloth. 

Maintenance treatment

Maintenance painting: 
Surfaces painted with Remontti-Ässä can be maintenance painted with same kind of waterborne paint.

Weight 3.00 kg
Dimensions 18 x 18 x 18 cm