VIVACOLOR Wall 20 C Semi-Matt Wall Paint 9L, Tinting Base Only

VIVACOLOR Wall 20 C 9 L is a semi-matt, washable water-based paint designed for walls and ceilings in dry and humid interior spaces. The C base is intended exclusively for tinting in dark and intensive shades and must not be used as an untinted colourless coating.

The paint creates a durable, dirt-repellent and easy-to-clean surface that retains its colour after washing. It is particularly suitable for areas requiring high resistance to wear and moisture, including hallways, kitchens, children's rooms, offices, schools and other intensively used spaces.

The product can be applied to new and previously painted concrete, plaster, brick, plasterboard, filled and wallpapered surfaces. Porous, filled or unevenly absorbent substrates must be primed with a suitable primer before painting.

After tinting, apply the paint in 1–2 coats using a roller, brush or airless sprayer. If required, the paint may be diluted with water by up to 10% of its volume. To obtain a consistent colour, mix enough tinted paint for the entire surface in one container.

• Type: washable water-based interior paint
• Application: walls and ceilings
• Suitable for dry and humid interior spaces
• Gloss level: semi-matt, 20
• Base: C
• Designed exclusively for tinting
• Suitable for dark and intensive shades
• Not intended for use without tinting
• Creates a dirt-repellent and easy-to-clean surface
• High resistance to wear and moisture
• Wet-scrub resistance: class 1 according to EN 13300
• Suitable for concrete, plaster and brick
• Suitable for plasterboard
• Suitable for filled and wallpapered surfaces
• Can be applied by brush, roller or airless sprayer
• Coverage: approximately 8–12 m²/l
• Theoretical coverage with 9 L: approximately 72–108 m² per coat
• Touch dry: after approximately 0.5 hours
• Recoatable: after approximately 2 hours
• Thinner and tool cleaner: water

Important! The C base may only be used after tinting in a tinting machine. Tinted products cannot be returned or exchanged. The surface must be clean, dry and stable. During application, the air temperature must be above +5 °C and relative humidity below 80%.