Logo
Categories chevron down Created with Sketch.
Sale

Your cart is empty

To add products to cart, please visit our product catalog.

Vivacolor WALL 7 A 0.9L Matt wall paint

Article: 189486

Category: Wall paints

Unit: pc.

Barcode: 4740193801010, 4740193810395

10,70 €/pc.
Available in stores:
Mūkusalas iela 93
Ata iela 5a
t/c Sāga

Matt wall paint

  • Very good hiding power
  • Even paint surface
  • Easy application
  • Good adhesion
  • Non dripping, non-splashing
  • Contains minimum amount of volatile organic compounds (VOC)

TECHNICAL DATA
Product Description

Wall 7 is a matt waterborne washable paint for interior use. Product has good adhesion and very good hiding power. Suits well for paint corrections, easy to apply, non-dripping, non-splashing. Washability > 10000 cycles (according to SFS 3755)

Fields of application
Walls and ceilings in dry premises (bedrooms, children's rooms, living rooms, halls, offices, residential buildings and public premises). Suitable for new and previously painted concrete, plaster-treated, brick, filler-treated or wallpapered surfaces; plaster blocks; primed fibreboard, plasterboard surfaces.

Gloss: Matt
Base paints: A - and C -base.
Tinting: The paint can be used white (base A) or tinted (base A, C) according to Tikkurila color cards. Tinted products cannot be exchanged. For better hiding power it is recommended to use primer which is tinted in similar shade
Coverage (per coat): Theoretical coverage: 8-12 m²/l.Practical coverage depends on the application method, conditions, shape and roughness of the surface to be treated.
Application method: To be applied with a painting brush, roller or airless spray (nozzle size 0,015” - 0,021” or 0,380 - 0,530 mm).
Drying time (+23 °С, 50% relative air humidity): 0,5 hour – touch-dry, 1-2 hours – recoatable. The surfaces can be cleaned in 1 month after painting.
Thinner: Water. The amount of thinner may be up to 5% of the paint volume.
Storage: Protect the product from frost!
Storage time: In tightly closed original container. Production/ best before dates are stated on a can. Reseal once opened cans well for next use.
Solid content: About. 40% v/v.
Density: Approx. 1.3 kg/l depending on shade (ISO 2811)
Wet scrub resistance: SFS-EN 13300 class 2, ISO 11998, >10 000 cycles according to SFS 3755.
Resistance to chemicals: Resistant to short-term exposure to household cleansers and weak solvents (white spirit).

INSTRUCTIONS FOR USE
PREPARATION
Unpainted surfaces:

Clean the surface of dust and dirt. Use suitable filler from Vivacolor series to treat uneven surface. Sand the surface and remove the dust formed. Filler-treated, porous or non-uniformly absorbing surfaces, as well as fibreboard- or plasterboard surfaces shall be primed with waterborne primer Primer 1. Prime metal surface with primer for metals Universal Korrostop. Prime chalk-based surfaces with alkyd primer Special Primer. When using any primer, follow relevant guidance for the use.
Previously painted surfaces:
Remove loose residues of old paint. Clean the surface with cleansing agent Special Clean, rinse it with water and allow to dry. Sand glossy and hard surface until matt, remove dust. Weak and dusty surfaces should be treated with alkyd primer Special Primer. Use suitable filler from Vivacolor series to treat cracks and uneven surfaces, sand the surface and remove the dust formed. Prime filler-treated surfaces with waterborne primer Primer 1.
PAINTING CONDITIONS
Surface should be clean and dry, air temperature between +5oC and +23C, the relative air humidity below 80%. Avoid draught during painting.
PAINTING
Thoroughly mix pain before painting, thin with water if required up to 5% of volume. To obtain uniform shade, mix together sufficient amount of tinted paint from different cans prior painting. Apply 1 or 2 layers with roller, brush or airless spray.
CLEANING OF TOOLS
Clean painting instruments from liquid paint residue, then wash with water. Tikkurila Pensselipesu Tool Cleaner is recommended to remove slightly hardened paint
CARE AND HANDLING OF SURFACE
The surfaces can be cleaned in 1 month after painting. To clean the surface, use a sponge or a cloth, moistened with water or a solution of a neutral cleansing agent (pH 6-8). To clean heavily soiled surfaces, use a sponge or a cloth, moistened with the solution of a low-alkali cleansing agent (pH 8-10). After cleaning, rinse the surface with clean water. On preparing the solution, follow the manufacturer’s instruction. After painting, the surfaces should not be heavily loaded, for under normal conditions the painted surface will gain its ultimate endurance and resistance to wear in approximately 1 month after painting. If the surface still needs cleaning prior to this time, it can be delicately cleaned with a sponge or cloth, moistened with water.
ENVIRONMENTAL SAFETY AND WASTE REGULATORY
Do not discharge the product into sewerage systems, watercourse, nor pour it onto the ground. Liquid waste should be discarded according to the local regulations. Dry and empty containers should be recycled or discarded in compliance with the local regulations.

Weight 1.00 kg
Dimensions 11 x 11 x 14 cm
Brand VIVACOLOR