Menu chevron down Created with Sketch.
Logo 0
Sale
Logo
Categories chevron down Created with Sketch.
Sale

Your cart is empty

To add products to cart, please visit our product catalog.

View cart
Tikkurila VALTTI KALUSTE 9L Furniture and Decking Oil, Grey

Tikkurila VALTTI KALUSTE 9L Furniture and Decking Oil, Grey

Article: 1098416

Category: Floor oils and waxes

Unit: pc.

Barcode: 6408070055328

108,90 €/pc.
Available in stores:
t/c Sāga
DESCRIPTIONSolvent-borne ready-to-use colored wood oil containing wax, for outdoor use.
PRODUCT FEATURESSuitable for surface oil treatment and colouring hardwoods brown for outdoor use. Also suitable for thermowood, impregnated and untreated wood, as well as wood previously treated with oil. The final colour of the surface will depend on the original wood colour. Grey oil works best on pale, neutral coloured substrate. Already grey and soft wood soaks up oil and the end result will be dark. Always test before application.
RECOMMENDED USES


Terraces, garden furniture, jetties, stairs


TECHNICAL DATA
 The paint is solvent-borneTool: sprayTool: brush
The coverage of the paint on rough surfaces
5
The coverage of the paint on smooth surfaces
15
Colour RangeBrown, grey and black
Gloss gradeundefined
Coverage

5-7 m2/l on old and worn wood surface

7-15 m2/l on new surface or wood surface in good condition

Can sizes0.9 l, 2.7 l and 9 l
ThinnerWhite Spirit 1050
Application methodBrush, spraying or sponge.
Drying time at 23°C and 50% relative air humiditySurface dries in several hours, depending on the porosity of the surface and the amount of oil used. Apply the second coat as soon as the surface is dry.
Weather resistanceCarry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually.
Solids volume25%
Density0.9 kg/l, ISO 2811
StorageUnaffected by cold storage. Badly closed or short cans and/or tinted products do not withstand long storage.

APPLICATION DETAILS
Application conditionsThe surface to be treated must be dry and relative wood moisture content less than 20 %, as damp wood will not absorb oil, which dries slowly. As impregnated wood is often damp, we recommend treatment after a 6-month drying period. 
The surface to be painted, the paint and the air temperature must be at least +5°C, and relative humidity below 80% during painting and drying 
PreparationUntreated surfaces: 
Remove all dirt, dust and loose material from the surface. Wash dirty wood surface with 
Terassi- ja Kalustepesu according to instructions. 
Surfaces previously treated with wood oil: 
Remove loose material from the surface with a scraper or wire brush. Wash dirty wood surface with Terassi- ja Kalustepesu according to instructions. If a clear film remains on the surface, remove it before treatment. Allow the surface to dry, as moist wood does not absorb oil, which dries slowly in damp conditions.
TreatmentReserve sufficient amount of the product from the same batch for one uniform surface. Stir Valtti Furniture and Decking Oil thoroughly before and frequently during use. Apply one coat of oil tightly by brush, spray or sponge so that all the oil is absorbed into the wood. Wipe off eventual excessive oil. To avoid overlapping, apply two thin coats of oil in continuous strokes to cover the whole surface evenly. One application is usually enough for exterior furniture. Porous wood may need two coats. When treating jetties take care that the oil does not end up in the water. Apply the second coat as soon as the surface is dry, after some hours depending on the weather. Every oil treatment will make the wood colour darker.
Cleaning of toolsWhite Spirit 1050 or Tikkurila Pensselipesu (Tool Cleaner).
Maintenance instructionsAfter application, treat the surface carefully for the first week to allow it to harden completely. After two days, gently clean the surface with a soft brush or mop if necessary. 
Clean dirty surfaces with Pihan Huoltopesu (1 part Pihan Huoltopesu to 10 parts water). Remove stains and clean very dirty surfaces with a stronger solution of Pihan Huoltopesu (1:1). After washing, rinse the surfaces and allow to dry.
Maintenance treatmentFor maintenance treatment you can also use colourless Valtti Wood Oil if you wish the surface not to be darker. Carry out maintenance if necessary. Surfaces continuously exposed to the weather may need to be treated annually.
Weight 10.00 kg
Dimensions 30 x 30 x 21 cm
Brand TIKKURILA