Logo
Categories chevron down Created with Sketch.
Sale

Your cart is empty

To add products to cart, please visit our product catalog.

PaintEco Boiled Linseed Oil Stain 10L Melon

Article: 1305586

Category: Wood preservatives

Unit: pc.

Barcode: 4751017290699

120,90 €/pc.
Available in stores:
Pre-order only!

Product description:

Highly pigmented boiled linseed oil that highlights wooden structure. Boiled linseed oil is main ingredient of stain and is responsible for surface penetrating abilities of the product. Fine ground pigments highlight wooden structure and provide an even coating, protecting surface from UV rays. Protects from moisture in long-term, does not peel or crack. Surface is easily renewable. Chosen shade may differ depending on type of wood.

PAINT ECO Stain is manufactured in 12 different shades (12 for indoors and 8  for outdoors); additional shades can be produced on request. 

Application: Outdoors and indoors. For uncoated surfaces (facades, floor planks, logs, furniture, etc.), as well as for previously oiled surfaces. Widely used for restoration projects.

Drying time: 24 hours at average temperature of +20 (± 2) ̊C. Low temperature, high humidity and wood moisture content can result in extended drying time.

Preparation of the surface:

·          surface must be dry and clean, free from dust and with no rosin residue

·          moisture content of wood cannot exceed 18%

·          product can be used only if the surface has been cleaned of previous coat(s) of chemical coating

·          it is recommended to use the product in average temperatures between +10 ̊C - +25 ̊C. Do not use on a sun heated surface

·          for outdoor use, prior to product application, in order to avoid or eliminate fungal infections of wood, it is recommended to apply water-based antiseptic in corresponding colour.

Consumption: 1 liter in a single coat covers            

·         rough sawn timber ~5-8 m2

·         planed timber ~8-12 m2

·         hardwood ~30-36 m2

                These consumption parameters are merely indicative; your consumption might differ from these parameters.

Course of work:

! Previous layer(s) of chemical coating must be removed.

OUTDOORS 

Recommended to coat in 2 layers

·         thoroughly stir the product before and during use

·         for application use short bristle brushes, rollers and sprays; cotton cloth or paper towels for wiping

·         first layer must be applied evenly, layer has to be as thin as possible, diluted with natural turpentine (up to 5%)

·         allow the product soak in for 20-30 min. after applying to planed timber or hardwood. Thoroughly wipe excess product with a clean cloth or paper towels

·         there is no need to wipe excess stain from rough sawn timber, distribute excess product across the surface

·         allow the surface to dry for at least 24 hours before applying the second layer

·         for second layer apply non-diluted stain. Course of work is identical as for application of first layer.

Maintenance: First maintenance in 5-7 years. Frequency of maintenance depends on weather impacts, location of the building, coating methods and conditions- factors that cannot be controlled by the manufacturer.  Therefore, when coating becomes dull, on top of previous coating, apply new layer of product.

INDOORS

Recommended to coat in one layer:

·         floor staining: dilute stain with natural turpentine (up to 5%). Apply stain in one thin layer

·         for extra protection, no less than after 24 hours apply PAINT ECO non-diluted floor oil (refer to instruction for use of Boiled Linseed Oil Floor oil).

Recommended to coat in two layers:

·         recommended to coat in two layers in places with high humidity (bathrooms, saunas, etc.)

·         first layer must be applied evenly, layer has to be as thin as possible, diluted with natural turpentine (up to 5%)

·         allow the product soak for 20-30 min. after applying to planned timber or hardwood thoroughly wipe excess product with a clean cloth or paper towels

·         there is no need to wipe excess stain from rough sawn timber, distribute excess product across the surface

·         allow the surface to dry for at least 24 hours before applying the next layer

·         for second layer apply non-diluted stain.

Tool cleaning:

It is recommended to clean used tools with natural turpentine or soapy water.

Storage:

Store the product away from children in thoroughly sealed packaging. Opened products must be thoroughly sealed after each use. Store in room temperature, away from sunlight. Do not store near food. In storage room avoid any ignition hazards – smoking near product is forbidden.

Expiration date: 3 years

CAUTION! Materials soaked with boiled linseed oil stain are under the risk of self-ignition! Immediately after use, paper towels or cloth must be burned or soaked in water and disposed. Avoid spilling into surrounding environment, ground water and oil.

Weight 10.00 kg
Dimensions 30 x 30 x 22 cm
Brand PAINTECO