Watertight, flexible, grout mortar for porcelaine, ceramic, glass, natural stones and marble tiles 1 to 8 mm
Silica Active technology for long-lasting results:
- Perfectly smooth surface
- Very stable colour
- High abrasion- & crack-resistance
- Aquastatic effect
- For indoor and outdoor use, on balconies and terraces
- For porcelain tiles, ceramic, glass, natural stones and marble
Ceresit CE 40 grout with SilicaActive technology is especially suited for grouting porcelaine as well as other other types of ceramic, glass, mosaic, natural stone tiles and marble (non-sensitive to discoloration). High abraision resistance and crack-resistance make it very long lasting and in combination with the TripleProtection it is effectivly protected against fungi and mould. Thanks to the Aquastatic effect water drops do not penetrate into the grout - therefore suitable for wet areas such as bathrooms, showers, kitchens. CE40 is a flexible grout and thus suitable for use on deformable/critical substrates: on balconies/patios, heated floors, chipboards etc.
Preparation & mixing
Adhesive mortar must have set and dried sufficiently and the joints must be free of adhesive residues and dirt.
Pour the required amount of CE 40 into a bucket with clean, clear water - use the correct mixing ratio with water as defined on the packaging. Mix with an electric driller until you achieve a homogenous mixture, free of lumps. Leave for 3 minutes to mature, then stir again.
Apply the mortar with a grouting tool on wall or floor in such a way that the joint is completely filled.
After the grout has started to set (fingertest), clean the area by wiping with a wet sponge and little water. The second cleaning should be done in diagonal movements with clean water.