PRODUCT DESCRIPTION
WaterStop 930 is the solution to almost every sealing problem. Whether it's holes, cracks, dry or wet surfaces, WaterStop 930 provides fast and secure adhesion to almost all surfaces. Universal fiber-reinforced sealing compound based on synthetic rubber. Fast adhesion to most building materials, even on wet surfaces and under water.
ADVANTAGES
- Insulates and seals even under water.
- Can be used in any weather, even in rain and snow.
- Instantly waterproof.
- Highly flexible – withstands construction movements of up to 1 cm without breaking.
- Thanks to the fibers, even several millimeters of cracks and holes are connected.
- Can be used at different temperatures (from -5 °C to + 30 °C).
- Bonds most materials used in buildings, boats and trailers.
- Weather resistant.
- Paintable with acrylic paints.
APPLICATION
- Sealing cracks and seams in gutters, chimney joints, sheet metal covers.
- Can be used to seal cracks and joints in boats and trailers.
- Repair of roofs, facades and other external parts of the building.
GRIP
- Aluminum
- Zinc
- Lead
- Glass
- Rock
- Asphalt
- Corrugated asbestos
- Roofing felt
- PVC
- Roof tiles
- A tree

USE
Terms of Use
Air temperature during use: -5°C and +30°C.

Surface preparation
The surfaces must be dry and clean of dust, dirt and oil. Non-porous surfaces should be cleaned with solvent and a clean, lint-free cotton cloth. Excess solvent must be removed before it evaporates with a clean cloth.

Usage
Mix well before use. Apply in a thick layer using a brush or spatula. In extreme conditions or larger cracks, apply fiberglass cloth over the sealed crack and apply a second coat of sealant after a few days. In the case of porous surfaces (e.g. concrete), it is recommended to prime.

Cleaning
Uncured sealant can be cleaned with solvents such as rubbing alcohol, acetone or special cleaning wipes. Hardened sealant can be removed mechanically.