Vincents HIDROSTOP H500 (A+B comp.) Cement-based, flexible, two-component waterproofing

Hidrostop H500 is a cement-based, flexible, two-component waterproofing intended for waterproofing swimming pools, water reservoirs, balconies, terraces, bathrooms, house roofs and foundations. It remains flexible at -20°C and is resistant to UV radiation! In the prepared form (by mixing components A and B), a homogeneous mass is obtained, which is suitable for processing horizontal and vertical surfaces.

User Instructions: The surfaces to be coated with "Hidrostop H500" must be whole (one-piece), clean, free from dust, oily liquids, biological growth, etc. adhesion reducing layers. Surface damage (cracks, debris) should be repaired using Vincents Polyline product "SUPER". Moisten the surface with clean water before application. Pour "Hidrostop H500" component B into a clean container and slowly add powdered component A while stirring with a mixer until a homogeneous mass is obtained. "Hidrostop H500" Development time – 45 min. Apply with a brush, trowel or high-pressure sprayer in two coats. The second layer is applied perpendicular to the first and no sooner than after the first layer has hardened (about 4-5 hours). The thickness of one layer should be at least 1 mm. Unstable beams: cracks, deformation joints, corners, floor and wall joints must be reinforced with a glass fiber mesh embedded between two layers of Hidrostop H500. Tiling works can be started 5 days after the application of waterproofing.

Consumption: 1.7 kg/m2 applied in 1 mm layer. Consumption may vary depending on surface structure.