Emulbit cold laying adhesive is a solvent based bitumen and latex rubber compound with additives. The characteristic of Emulbit glue is a larger workable surface area with lower product consumption, which makes it a financially beneficial choice. The product is intended for gluing ruberoid on concrete and plaster bases or for gluing ruberoid in layers with the aim of creating multi-layer waterproofing. The glue has a high concentration of resin, which ensures a high degree of adhesion (up to 212 N). Ready to use only after mixing. After being applied directly to the base surface to be processed, the adhesive layer becomes resistant to washing with water. The product has excellent penetration into the surfaces to be sealed. It is also characterized by good adhesion to the base surface (eg concrete, asbestos cement sheets and steel). After curing, the product forms a homogeneous, durable and flexible coating that is resistant to weathering and biological corrosion.

Application:

Gluing of ruberoid on concrete and plaster.

Gluing of ruberoid in layers in multi-layer waterproofing systems.

Waterproofing for pitched roofs, flat roofs, leveling layers of cement coverings, terraces, as well as the adhesive is suitable for working with small-area bases.

Creation of anti-corrosion coatings.

The product is intended for outdoor work.

Technical data:

Consumption (in one layer): 0.8–1.2 kg/m2 (depending on the type of base surface)

Application temperature: From +5°C to +30°C

Drying time (1 mm wet films): Fully hardens in about 24 h (air temperature 20°C, relative air