Caparol Sylitol Minera 8kg Silicate-based, quartz-filled priming and finishing coat

Article: 142664

Category: Paints for facades and concrete surfaces, Paints for facades and concrete surfaces

Unit: pc.

Barcode: 4002381784056, 4002382028012

32,70 €/pc.

Available in stores:

Mūkusalas iela 93

Ata iela 5a

t/c Sāga

Description

Silicate-based, quartz-filled priming and finishing coat for exterior and interior use – as per DIN 18363, section 2.4.1.

Field of Application

Suitable for filling, texture levelling and crack filling coatings, for exterior and interior use. Applicable as priming, intermediate or finishing coat.

Sylitol® Minera is perfectly suitable for adhesion promoting priming coats on surfaces on which coatings have been etched away by paint stripper. Highly suitable as priming coat before applying silicate-based coatings. Sylitol® Minera can also be used for filling small joints or surface defects and fine cracks in renders/plasters, before the application of Sylitol® paints and renders/plasters.

Sylitol® Minera is particularly suitable as fine textured intermediate coating in interiors before applying creative silicate translucent glazing/scumbling coat techniques. Sylitol® Minera is suitable for protective coatings on AAC wall panels and complies with the requirements of AAC manufacturers.

Caparol interior thermal insulation systems:
Suitable for use on Capatect IDS Aktiv and Capatect IDS Mineral.

Material Properties

Free of preservatives, solvent-free, unplasticized.
Weather-resistant.
Crack filling, high filling capacity.
Allows sorption.
Permeable to CO2
Highly adherent to mineral substrates due to silicification.
Ecologically compatible.
Fire classification: "Nichtbrennbar" (non-combustible), A2 as per German standard DIN 4102.
Free of fogging-active substances.

Material Base / Vehicle

Potassium silicate (waterglass) with organic additives, according to DIN 18 363, section 2.4.1.

Packaging/Package Size

Standard Product: 8 kg, 22 kg

Colours

White. Tintable to a max. of 10 % with Histolith-Volltonfarben (colourants).
The desired texture and filling power cannot be obtained, if a higher amount of colourants is added.
If more than one bucket is manually tinted, all product must be thoroughly mixed before use in order to avoid colour differences. Quantities of 200 kg or more in individual colours may be ordered ready-tinted ex factory.

Sylitol® Minera can be tinted to all current colour collections via the ColorExpress tinting & mixing machine system, in light colours up to luminosity/lightness index (LI) approx. 70. Check tinted product before applying to avoid colour differences. Always use tinted product of same batch, when applying on seamless surfaces.
For AAC coatings the LI (reflection factor) should be above 40.
Brilliant, intensive colours may have a lower opacity (hiding/covering power). It is therefore advisable to apply a first coat in a similar hiding pastel tint, based on white. Possibly a second finishing coat may be necessary.

Colour Resistance according to BFS Data Sheet No. 26: Class: B Group: 1

Gloss Level

Matt (flat)

Storage

Keep in a cool, but frost-free place. Store product only in plastic containers and keep partially used buckets tightly closed. Shelf life: approx. 12 months.

Technical Data

Characteristics according to DIN EN 1062: Tinting may cause variations.

Maximum particle (grit) size

< 1500 µm, S3

Density

Approx. 1.7 g/cm3

Dry film thickness

200 - 400 µm, E4

Water permeability (w-value)

≤ 0.1 (0.09) [kg/(m2·h0.5)] (low), W3

Crack bridging classes

Surface coating system:
2 x 400 g/m2 Sylitol® Minera, Class: A1 (> 100 µm)

Water vapour permeability (sd-value)

≤ 0.14 (0.015) m (high), V1

Supplementary Product

Sylitol® Konzentrat 111 (Concentrate)