Natural boiled linseed oil is the main product of PAINT ECO. Pigmentless linseed oil, heated using a unique technology. Boiled linseed oil soaks in to the wood, therefore molecular bonding creates durable and long-lasting protection. Protects from moisture. Product is ready for use.

Application: Indoors. Boiled linseed oil can use for all kinds of wooden surfaces – furniture, walls, ceilings, etc. For uncoated surfaces as well as for previously oiled surfaces. Also can be used as a primer for concrete, metal, plaster, etc, and for diluting boiled linseed oil stains and paints. Widely used in restoration projects.

Drying time: 24 hours at average temperature of +20 (± 2) ̊C. Low temperature, high humidity and wood moisture content can result in extended drying time.

Preparation of the surface:

surface must be dry and clean, free from dust and with no rosin residue

moisture content of wood cannot exceed 18%

product can be used only if the surface has been cleaned of previous coat(s) of chemical coating

it is recommended to use the product in average temperatures between +10 ̊C. – +25 ̊C. Do not use on a sun heated surface.

Consumption: 1 liter in a single coat covers

rough sawn timber ~5-8 m2

planed timber ~8-12 m2

hardwood ~30-36 m2

            These consumption parameters are merely indicative; your consumption might differ from these parameters.

Course of work:

! Previous layer(s) of chemical coating must be removed.

INDOORS

Recommended to apply in one layer.

for application use short bristle brushes, rollers and spray; cotton cloth or paper towels for wiping

product must be applied evenly, layer has to be as thin as possible

allow the product to soak for 20-30 min. after applying to planed timber or hardwood, thoroughly wipe excess product with a clean cloth or paper towels

there is no need to wipe excess oil from unprocessed wood, distribute excess product across the surface.