Composition of low viscosity epoxy resins. It is used as component No. 1 in a two-component (component No. 1 - resin composition, component No. 2 - hardener) system for pouring up to 5 cm. Also used as a 2-component potting compound for industrial and decorative coatings, floors, fiberglass impregnation, plywood, top coats, etc.
PROPERTIES:

Transparent with UV protection against yellowing;
Excellent adhesion to various substrates;
Small formation of bubbles;
High strength;
Short curing time;
High fluidity - self-levelling;
Resistant to chemicals.
APPLICATION: The surfaces to be bonded must be clean, hard and slightly rough. Surface moisture should not exceed 10% (wood 5%). Apply on concrete substrates not earlier than 28 days after concrete laying. The minimum application temperature is +15°C. Components No. 1 and No. 2 must be thoroughly mixed in the correct ratio of 100:23. Tools and equipment should be cleaned immediately with an acetone-based solvent after use.
CURE TIME: Primary curing time of the mixture, workability time - from 30 - 60 minutes at room temperature. Full curing time is 24 to 60 hours at room temperature, depending on layer thickness and temperature.
STORAGE: In original packaging at +5°С to +25°С. The shelf life is indicated on the packaging.