Logo
Categories chevron down Created with Sketch.
Sale

Your cart is empty

To add products to cart, please visit our product catalog.

Stafor epoxy resin medium thick with hardener, transparent 1.23kg

Article: 201979

Category: Other sealants

Unit: pc.

Barcode: 4751005616784

26,10 €/pc.
Available in stores:
Pre-order only!

Composition of modified epoxy resins of medium viscosity. It is used as component No. 1 in a two-component (component No. 1 - resin composition, component No. 2 - hardener) system for pouring up to 5 cm. Also used as a 2-component potting compound for industrial and decorative coatings, floors, impregnation of fiberglass, plywood, etc. Particularly suitable for reinforcement.
PROPERTIES:

Transparent with UV protection against yellowing;
Excellent adhesion to various substrates;
Small formation of bubbles;
High strength;
Short curing time;
Particularly suitable for reinforcement;
Resistant to chemicals.
APPLICATION: The surfaces to be bonded must be clean, hard and slightly rough. Surface moisture should not exceed 10% (wood 5%). Apply on concrete substrates not earlier than 28 days after concrete laying. The minimum application temperature is +15°C. Components No. 1 and No. 2 must be thoroughly mixed in the correct ratio of 100:23. Tools and equipment should be cleaned immediately with an acetone-based solvent after use.
CURE TIME: Primary curing time of the mixture, workability time - from 30 - 60 minutes at room temperature. Full curing time is 24 to 60 hours at room temperature, depending on layer thickness and temperature.
STORAGE: In original packaging at +5°С to +25°С. The shelf life is indicated on the packaging.

Weight 1.23 kg
Dimensions 15 x 15 x 15 cm
Brand STAFOR