Remmers HK-Lasur Plus 3in1 20L Palisandr for Lazura wood

Premium class solvent-based wood protection varnish for outdoor wooden products.

Consumption Approx. 100 ml/m2 per coat; at least 2 coats required Planed or very dense wood has a lower absorption capacity and may require a 3rd coat

Areas of use

Outdoor wood

Wood without contact with the ground

Dimensionally unstable wood components, e.g. fences, frames, carports, wood cladding

Wood components with limited dimensional stability, e.g. folding shutters, profile boards, garden houses

Dimensionally stable wood components (only for priming): e.g. windows and doors

Base coat, intermediate coat, top coat

Not suitable for application on floor surfaces (terraces, wooden decks, etc.)

Properties

Three in one: impregnation agent, primer and stain

Protects wood against moisture and UV radiation

Impregnation effect: saturates the wood against moisture

Open to diffusion protective layer: moisture can escape

Hydrophobic: wet surfaces dry quickly Protection against atmospheric precipitation (construction wood protection and product moisture protection) reduces the risk of blueing and rot

Preparation for work

Substrate requirements Dimensionally stable wooden parts: wood moisture content 11-15% Dimensionally stable and unstable wooden parts: wood moisture content max. 18%

Preparation

Completely remove all previous paint (e.g. thick glaze or decorative paint), bark, splinters, dirt. Remove loose or cracked branches and exposed resin areas and clean them with a suitable agent (e.g. solvent and brush cleaner). Sand and dust smooth and planed wooden surfaces as much as possible before painting to ensure better paint absorption. Observe the instructions in BFS information bulletin no. 18 “Coatings on wood and timber materials outdoors”.

Material, ambient and base temperature: min. +5 °C to max. +30 °C.